Zanussi FLS 1185QAL,FLS 1185QW,FLS 985QAL,FLS 985QW Instruction Manual
Bookmarks and Contents
Bookmarks and Contents
PDF Info
Zanussi FLS 1185QAL,FLS 1185QW,FLS 985QAL Instruction Manual
- Brand:
- Zanussi
- Category:
- Washing Machines
- Model:
- FLS 1185QAL, FLS 1185QW, FLS 985QAL, FLS 985QW
- Type:
- Instruction Manual
- Language:
- English
- Document Format:
- PDF file
- Filesize:
- 381.4 Kb
- Total Pages:
- 27 pages
Contents
Unpack
Install
- P2 Work Required To Install This Appliance ...
- P3 Installation Instructions ...
- P18 Installation ...
- P20 N The Product Is Installed Taking Into Account ...
- P21 Any Plumbing Work Required To Install This ...
- P22 Installation ...
- P23 Installation Should Comply With Local Water ...
- P24 That When The Appliance Is Installed It Is ...
- P26 You Install A Double Pole Switch Between The ...
Connect
- P3 Electrical Connection ...
- P14 Connected To Cold Water Only ...
- P16 Must Disconnect The Appliance From The ...
- P17 N Disconnect The Appliance. ...
- P18 Connecting To The Waste. ...
- P22 A Variety Of Connectors Are Available From ...
- P23 Cannot Make The Cold Water Connection Direct ...
- P24 Before Connecting Up The Machine To New ...
- P25 That These Appliances Are Not Connected To ...
- P26 Case Of Permanent Connection It Is Necessary ...
Power
- P4 Power Supply Cable And Make The Door Lock ...
- P18 Is Not Properly Inserted In The Power Socket. ...
- P21 Total Power Absorbed ...
Operate
- P2 Appliance Is Designed To Be Operated By Adults. ...
- P4 Device May Have Operated. It Will Therefore Be ...
- P19 On Modern Technology Operate Very Economically ...
- P23 Rising Mains ...
Safety
- P2 Such As Coins ...
- P3 Safety Instructions ...
- P8 Door Is Controlled By A Safety Device Which ...
- P10 Door Is Controlled By A Safety Device Which ...
- P12 (using A Safety Pin) To An Article ...
- P26 A Serious Safety (shock) Hazard. ...
Specification
- P2 Is Dangerous To Alter The Specifications Or Attempt
- P3 Technical Specifications ...
- P21 Technical Specifications ...
Dimension
Contact
- P2 Malfunctioning. Contact Your Local Zanussi ...
- P18 The Machine Is In Contact With The Wall Or ...
- P19 Parts Contact Your Local Zanussi Service Force ...
- P20 You Move Please Contact Your Nearest Customer ...
- P25 Require Any Further Advice Please Contact Your ...
- P26 3mm Between The Switch Contacts And Of A Type ...