THINGS TO NOTE, TO FIT THE TOP OVEN SHELF, USING THE TELESCOPIC RUNNERS

35
THINGS TO NOTE
1.  The top oven indicator neon will glow until the
oven has reached the desired temperature and
then go out.  It will turn ON and OFF periodically
during cooking showing that the temperature is
being maintained.
2.
The cooling fan for the controls may operate,
after a period of time.
3.
Dishes, tins or trays should not be placed directly
on the top oven base as it becomes very hot and
damage will occur.
TO FIT THE TOP OVEN SHELF
The cranked shelf should be fitted with the straight
rods uppermost on the frame and the forms towards
the back of the oven.  If not fitted correctly the anti-tilt
and safety stop mechanism will be affected.
USING THE TELESCOPIC RUNNERS
(
where fitted
)
1.
Ensure the telescopic runners are pushed back
into the oven cavity before fitting the shelf.
2.
Holding the front edge of the shelf with both
hands, place the rear shelf forms over the
telescopic runners.
3.
Slide the shelf into position, lifting slightly at the
front so that the shelf locates into the retaining
hooks.
To remove, raise the front edge and withdraw the
shelf.
Ensure the shelf is positively located before using.
Note
Should you wish to purchase a telescopic runner kit,
this can be ordered from your local Service Centre by
quoting part number (BAZD02).
RETAINING
HOOK
FORM