This oven must be installed by qualified
personnel to the relevant British Standards.
The oven is designed to be connected to 230-240V (50Hz)
The oven has an easily accessible terminal block which
is marked as follows:
THIS OVEN MUST BE EARTHED
The cable used to connect the oven to the electrical
supply must comply to the specifications given below.
It is necessary that you install a double pole switch
between the oven and the electricity supply (mains), with
a minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance with
the current rules.
The switch must not break the yellow and green earth
cable at any point.
After installation and connecting, the cable must be
placed so that it cannot at any point reach a temperature
of more than 50°C above the ambient temperature.
Before the oven is connected, check that the main fuse
and the domestic installation can support the load; and
that the power supply is properly earthed.
The manufacturer disclaims any responsibility should
these safety measures not be carried out.
The oven must be installed according to the
Heating elements rating
Inner Grill element
Double Grill element
Supply voltage (50 Hz)
Cable / flex Fuse
13 A socket 2.5 mm
15 A min.
20 A max.
For Uk use only
For Europe use only
Min. size Cable/flex Cable / flex type
H07 RN-F, H05 RN-F, 13 A
H05 RR-F, H05 VV-F,
H05 V2V2-F (T90),
Dimensions of recess
Dimensions of the oven cavity