Installation instructions

24
Any electrical work required to install 
this appliance should be carried out by a 
qualified electrician or competent 
person.
Any plumbing work required to install 
this appliance should be carried out by a 
qualified plumber or competent person.
Remove all packaging before positioning the
machine.
If possible, position the machine next to a water tap
and a drain.
Water supply connections 
This dishwasher must be plumbed into a cold water
supply.
The water pressure must be within the limits given in
the technical specifications. 
Your local Water Authority will advise you on the
average mains pressure in your area. 
The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation. 
Do not use, for the connection, old hoses which
have been used in another appliance.
The locknut must be correctly fitted to avoid
water leaks. 
Avoid bends or kinks in the hose which could
prevent or slow down the water supply. 
If the machine is connected to new pipes or pipes
which have not been used for a long time, you
should run the water for a few minutes before
connecting the inlet hose. This will prevent deposits
of sand or rust clogging the inlet hose filter. 
Installation instructions