IMPORTANT SAFETY INSTRUCTIONS
Prior to Installation
Check the appliance for transport damage. Under
no circumstance should a damaged appliance be
installed. In the event of damage please contact
This appliance is heavy. Care should be taken
when moving it.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Ensure that the appliance does not stand on the
electrical supply cable.
Important: if the supply cable is damaged, it must
be replaced by a cable available from the
manufacturer or your local Service Force Centre.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall, but leaving the required
distance for ventilation, as stated in the installation
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow
the refrigerant to settle.
The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
During transportation and installation of the
appliance, be certain that none of the components
of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
- avoid open flames and sources of ignition.
- thoroughly ventilate the room in which the appli-
ance is situated.
Do not allow children to tamper with the controls or
play with the product.
There is a risk of suffocation! Keep packaging
material away from children!
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by
Take utmost care when handling your
appliance so as not to cause any damages to
the cooling unit with consequent possible fluid
The appliance must not be located close to
radiators or boilers.
Avoid prolonged exposure of the appliance to
Do not use other electrical appliances (such as
ice cream makers) inside of refrigerating
This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs. It is
not intended for commercial or industrial use.
Containers with flammable gases or liquids can
leak at low temperatures. Do not store any
containers with flammable materials, such as
spray cans, fire extinguisher refill cartridges etc. in
Frozen food should not be refrozen once it has
Do not place carbonated or fizzy drinks in the
Ice lollies can cause ‘frost/freezer burns’ if
consumed straight from the freezer.
Do not remove items from the freezer
compartment if your hands are damp/wet, as this
could cause skin abrasions or frost/freezer burns.
Placing frozen goods on the top of the appliance
can lead to the accumulation of condensation in
the cavity of the storage tray through contact with
the cold. Electronic components are housed within
this cavity. If condensation should drip onto these
components, the appliance could be damaged by
a short circuit. For this reason do not place frozen
goods on top of the appliance.
Bottles and cans must not be placed in the freezer
as they can burst when the contents freeze.
These warnings are provided in the interests of your safety. Ensure that you understand them all before
installing or using this appliance. Your safety is of paramount importance. If you are unsure about any
of the meanings of these warnings contact the Customer Care Department.