TO REPLACE THE OUTER, DOOR GLASS, TO CLEAN THE INNER GLASS DOOR, CLEANING THE MAIN OVEN

TO REPLACE THE OUTER
DOOR GLASS
1. Holding the door glass panel with both hands,
gently place the locators into the holes of the
brackets at the bottom of the oven door.
2. Holding the door glass with your left hand,
use your right hand to open the oven door.
Bring the door gently towards the glass panel
ensuring the screw location holes line up.
3. Place the trim in the correct position on the
top of the grill door.
4. Hold the glass in place with one hand and
insert the cross head screws with washers
into the location holes with the other hand.
Give the screws one turn to ensure the glass
is secure.
5. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
TO CLEAN THE INNER GLASS
DOOR
The inner glass door is not removable. Clean
using hot soapy water or Hobbrite and a soft
cloth. DO NOT use abrasives as they may
damage the glass or seal.
CLEANING THE MAIN OVEN
The main oven top and sides are coated with a
Stayclean finish. The back panel is vitreous
enamelled.
The Stayclean areas in the main oven should
not be cleaned manually. See Care of
Stayclean Surfaces on page 33. 
The main oven base and back panel can be
cleaned using normal oven cleaners or aerosol
oven cleaners with care. Ensure that the
manufacturers instructions are followed and
protect the oven burner with aluminium foil to
prevent it from becoming blocked.  Do not spray
aerosol cleaners through the aperture in the
back panel as the cavity behind is coated with a
Stayclean finish.
Take care when cleaning round the back panel
aperture.
Do not use any cleaning agents or scrapers on
the oven roof, back panel sides and door seal.
Damage will occur if soap impregnated steel
wool pads, aerosol cleaners or any abrasive
cleaners are used.
31
DO NOT attempt to use the oven
without the glass being in place.