CONTROLS AND FUNCTIONS
MULTI CH IN
Selects the MULTI CH INPUT mode when using an
external decoder (etc.).
Input selector buttons
Select the input source and change the control area.
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received when one component is connected to two
or more of this unit’s input jacks (see page 34). Priority
cannot be set when MULTI CH INPUT is selected as the
DSP program/Numeric buttons
Use to select sound field programs or input numbers
according to the position of 10KEY/DSP.
Mutes the sound. The MUTE indicator turns on when the
MUTE function is on. Press again to restore the audio
output to the previous volume level.
Increases or decreases the volume level.
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
Selects the PARAMETER mode or SET MENU mode.
Use to select and adjust DSP program parameters or SET
MENU items according to the position of PARAMETER/
Slide down to use the concealed buttons for various setup
and parameter operations.
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
Handling the remote control
• Do not spill water or other liquids on the remote
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity such as near a bath
– high temperature such as near a heater or stove
– extremely low temperature
– dusty places
Using the remote control
REC OUT/ZONE 2
Approximately 6 m (20 feet)
00_RX-V2400U_EN.book Page 7 Friday, October 10, 2003 10:54 AM