SETUP

SETUP
Setting various functions (Setup menu)
 En
 98
Auto-adjusting Dolby Digital and DTS 
dynamic range
Dynamic Range
Selects the dynamic range adjustment method for audio bitstream 
(Dolby Digital and DTS) signal playback.
Setting the maximum volume
Max Volume
Specify the maximum volume level so that sound is not too loud. 
The default setting of +16.5 dB produces the highest volume.
Setting the startup volume
Initial Volume
Sets the initial volume for when this receiver is turned on. When 
this parameter is set to “Off,” the volume is set at the level when the 
receiver last entered standby mode.
J
1
Video signal output in Pure Direct Mode
Pure Direct Mode
Selects whether or not this unit outputs video signal in Pure Direct 
Mode.
Adjusting DSP effect and volume level
Adaptive DSP Level
Automatically adjust the level of DSP effect in conjunction with 
the volume level.
MAX (Default)
Produces audio without adjusting the dynamic range.
STD
Adjusts the dynamic range for optimum volume for 
regular home use.
MIN/AUTO
(MIN) Sets the dynamic range suitable for low 
volume or a quiet environment, such as at night, for 
bitstream signals except for Dolby TrueHD signals.
(AUTO) Adjusts the dynamic range for Dolby 
TrueHD signals based on input signal information.
Adjustable range
-30.0 dB to +16.5 dB (maximum volume)
Default setting
+16.5 dB
Adjustment 
increments
5.0 dB
Adjustable range
Off, Mute, -80.0 dB to +16.5 dB
Default setting
Off
Adjustment 
increments
0.5 dB
Auto (Default)
Automatically output video signal when the input 
source equipping video signal input jacks or content 
window is selected. If no video signal is input, only 
the wall paper is displayed.
Video Off
Does not output video signal including the wall paper.
Off
Disables automatic adjustment of the level of DSP 
effect.
On (Default)
Adjusts the degree of DSP effect in conjunction with 
volume level. The higher the volume level, the less the 
DSP effect applied. The lower the volume level, the 
greater the DSP effect applied.
This feature also corrects sound effect according to 
the result of automatic measurement.
J
1 :
When you set “Max Volume” at a lower level than “Initial Volume,” “Max 
Volume” has priority.