Yamaha RX-V2067_IM Owner Manual

SETUP

SETUP
Enjoying the contents in another room
 En
 131
Controlling Zone2 or Zone3
The remote control can be used to select and control 
Zone2 or Zone3
 
devices. The available operations are as 
follows:
Selecting the input source of Zone2
 or 
Zone3.
Tuning into FM or AM when “TUNER” is selected as the 
input source of Zone2
 or 
Zone3.
Adjust the volume of Zone2 or Zone3
 
devices (when 
connected via the built-in amplifier).
Activating the Zone2 or Zone3
 
operation mode
Press 
B
ZONE
 to ZONE2 or ZONE3
 
before attempting 
to use the remote control to control Zone2 or Zone3
 
devices.
Operating Zone2 or Zone3
To enable and disable the audio output to Zone2 
or Zone3
Press 
l
RECEIVER 
A
.
To select an input source for Zone2 or Zone3
Press 
d
Input selector
.
To use SCENE function for Zone2 or Zone3
Press and hold 
e
SCENE
 key for about 3 seconds to 
register the current setting to the scene.
Press 
e
SCENE
 key to load the registered setting.
To enable the sleep timer for Zone2 or Zone3
Automatically switch the Zone2 or Zone3
 
device to 
standby mode after a specified period of time has elapsed 
(sleep timer). Press 
y
SLEEP
 repeatedly to specify a 
time for the sleep timer function. 
Adjusting Zone2 or Zone3
 
high-/
low-frequency sound (Tone 
Control)
1
Press ZONE CONTROL on the front panel.
2
Press TONE/BALANCE on the front panel 
repeatedly to select “Treble” or “Bass.”
3
Press PROGRAM 
l
 / 
h
 to adjust the output 
level in the applicable frequency range.
The display returns to the previous display soon after the 
key is released.
Adjusting Zone2 and Zone3 front 
speaker balance
1
Press ZONE CONTROL on the front panel.
2
Press TONE/BALANCE on the front panel 
repeatedly to select “Balance.”
3
Press PROGRAM 
l
 / 
h
 to adjust balance.
The display returns to the previous display soon after 
the key is released.
Controlling the content window on 
the TV monitor in another room
When “Monitor Out Assign” is set to “Zone2” or 
“Zone3,” the following items can be set with Option 
menu in the Zone2 or Zone3.
Adjusting the Tone Control for the Zone2
 or 
Zone3.
Setting the Repeat and Shuffle functions. (only when 
selecting DOCK/PC/USB)
Enjoying the music in all rooms
Use this feature to play main zone sources in other zones 
simultaneously. This feature is useful when you want to 
play back main sources as background music in a home 
party, etc. When using the party mode, set “Party Mode 
Set” to “Enable” (
☞p. 104
).
Press 
v
PARTY
 to turn on or off the party mode.
“Party Mode On” or “Party Mode Off” appears on the 
front panel display or the TV screen.
While this unit is in the party mode, the PARTY 
indicators turn on in the front panel display.
2
3
AV
AUDIO
SCENE
1
4
4
3
1
2
7
5
6
V-AUX
4
3
1
2
USB
MULTI
NET
PHONO
TUNER
DOCK
4
SLEEP
PARTY
ZONE
SOURCE
RECEIVER
TUN./CH
[ B ]
[ A ]
l
B
v
d
y
e
Only the following sources are available for 
Zone2 or Zone3.
AV1-4 (only analog audio input), V-AUX (only 
analog audio input), AUDIO1-4 (only analog audio 
input), PHONO, USB, NET, DOCK, TUNER
The following settings can be registered 
for each scene of the Zone2 or Zone3.
Input, Master Volume, Tone Control
Adjustable range
-10.0 dB to +10.0 dB
Adjustment 
increments
2.0 dB
120min.
90min.
60min.
30min.
Off
NOTE
The Option menu in Zone2 or Zone3 can be 
controlled with the same operation as for controlling 
the Option menu for the main zone (
☞p. 57
).
Input audio signals are mixed down to 2ch Stereo and 
output at the analog ZONE2 OUT or ZONE3 OUT 
jacks.
Party mode can be turned on only when the power of 
main zone is turned on.
Party mode automatically turns off when the power of 
main zone is turned off.