Yamaha RX-V2067_IM Owner Manual

SETUP

SETUP
 En
 125
This unit supports the HDMI Control function, which allows you to 
operate external components via HDMI. If devices that support 
HDMI Control (e.g., Panasonic VIERA Link-compatible TVs, 
DVD/Blu-ray Disc players, etc.) are connected
J1
, remote 
controls for those devices can be used to perform the following 
operations:
– Power synchronization (on/standby)
– Volume control, including Mute
– Changing the volume of the audio output signal device (either the 
TV or this unit)
1
Connect the TV that supports the HDMI Control 
function to this unit’s HDMI output jack.
2
Connect the BD/DVD player that supports the HDMI 
Control function to this unit’s HDMI input jack.
3
Turn on the TV and this unit.
Refer to the TV’s instruction manual on how to operate external 
components.
4
Set the TV and this unit’s HDMI Control function to 
“On.”
5
Turn the TV off.
Other synchronized HDMI Control devices are turned off with the 
TV. If they are not synchronized, unplug the power cable of the 
TV.
6
Turn the TV on.
Confirm that this unit has turned on in conjunction with the TV. If 
it is still off, turn it on manually.
7
Change the TV’s input setting to the input jack that 
is connected to this unit (e.g., AV1).
8
If BD/DVD player that supports the HDMI Control 
function are connected to this unit, turn them on.
9
Confirm that this unit is properly synchronized with 
the TV through the following operations by using the 
TV remote control.
• Power On/Off
• Volume Control 
• Switching between audio output devices
Using the HDMI Control function
NOTE
The following is an example of how to connect this unit, a TV, 
and a BD/DVD player. Follow the instructions in your TV and 
BD/DVD player manuals, as well as the ones written below. 
– Set the TV’s HDMI Control function to “On”
– Follow the AV amplifier connection instructions, and connect 
this unit to the TV
HDMI
Control signal 
(such as volume control)
Remote control of TV
This unit
TV
HDMI connection
This unit
Confirm that “HDMI Control” is set to “On” 
(
☞p. 101
) and select the HDMI OUT jack connected 
to the TV in “Control Select” (
☞p. 101
).
J2
TV and BD/DVD 
player
Check the instruction manuals for those devices.
This unit
Confirm that the input source for the BD/DVD players 
has been selected. If a different input source has been 
selected, change it manually.
TV and BD/DVD 
player
Confirm that the video signal from the player is being 
properly received by the TV.
Operations 1-8 will not be required more than twice. However, 
perform operations 1-8 again when switching the HDMI OUT 
jack using Control Select.
If this unit is not synchronized to the TV’s power operations, 
check that the HDMI Control function is set to “On” for both 
devices. 
If they will not properly synchronize, unplugging and re-
plugging the power cable of this unit and the TV may solve the 
problem.
J
1 :
We recommend that you use TVs and BD/DVD players from the same 
manufacturer whenever possible.
J
2 :
The default setting for the HDMI Control function is “Off.”