REMOTE CONTROL FEATURES
Clearing Learned Functions,
Renamed Source Names, and
Setup Manufacturer Codes
Press an input selector button or Å to select
the area for which you want to clear the
name, function or manufacturer code.
Press CLEAR by using a ballpoint pen or
• If you do not press any button within 30 seconds during steps 2
and 3, the clearing process is canceled. If this happen, start over
from step 1.
Press u / d to select the clear mode.
The mode is shown in the display window in the
Press and hold CLEAR again for about 3
“C:OK” appears in the display window.
• “C:NG” appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function or macro
for a button, the button reverts to the factory setting.
• “ERROR” appears in the display window when pressing
buttons other than indicated in each step, or more than one
button at once.
(L: name of a component) Clears
all learned functions for the
Clears all learned functions for
this unit control area.
Clears all learned functions.
Clears all renamed source names
in the display window.
Clears all programmed functions
including setup manufacturer
codes. This returns to the factory
01.7.6, 9:29 AM