Controls and input connections

12
CONNECTING YOUR TV
En
glis
h
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the 
buttons on the television may be used for some functions.
If the RED LED is not lit, check that the mains plug is 
connected to the power supply and press 
1
 on the remote 
control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press 
1
 on the remote 
control. To view the television, press 
1
 again. The picture may 
take a few seconds to appear.
Press MENU on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is 
selected by pressing 
C
 or 
c
 on the remote control, its 
respective options will appear below.
NOTE: The same menu is displayed in DTV (Digital TV) and 
ATV (Analogue TV) modes; however, where some items are 
not available in a mode, they will appear greyed out.
To use the option, press 
B
 and 
b
 on the remote control to 
move up and down and press 
C
 or 
c
 to select your desired 
setting. Follow the on-screen instructions. The functions of 
each menu are described in detail throughout the manual.
To alter the volume press – 
2
 +.
To alter the programme position press 
b
 
p
 
B
.
Press MENU and 
Bb
 
cC
 to control the sound and picture 
options.
Press MENU to finish.
The Media Player feature provides access to photo, movie and 
music files stored on a USB storage device that is connected 
via the USB port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba 
can take no responsibility for damage to other connected 
equipment.
The USB socket has to be used with the “TOSHIBA Dual Band 
WLAN Adaptor WLM-10U2” in order to access a wireless network. 
You must use the TOSHIBA Wireless LAN device to ensure 
correct operation of this feature. This feature is available only 
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
To select an external input, press 
o
 until the appropriate 
input source is selected.
Please always refer to the owner’s manual of the equipment to be 
connected for full details.
NOTE: Interactive video games that involve shooting a “gun” 
at an on-screen target may not work with this TV.
COMMON INTERFACE
The Common Interface is for a Conditional Access 
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be 
automatically executed. At this time, your 
Recording/Reminder programming will be 
canceled.
Ambient 
Light Sensor
RED LED – Standby
GREEN LED – Power on
ORANGE LED – Programme 
timer set (digital only)
RED LED – Programme timer 
Active (digital only)
USB port
Media Player / Wireless LAN adaptor ready for a 
home network
Control panel
ILLUSTRATION SHOWS 42RL853.
Switching on
For energy saving:
We recommend that you use the television with the factory 
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for 
all televisions. This is recommended when the television is 
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves 
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce 
energy consumption, but will still draw some power.
Using the remote control
Using the controls and connections