5 Installation

5.1 Electrical connection

General information

Check the grid characteristics against the 
data indicated on the plate. The 
identification plate bearing the technical 
data, serial number and brand name is 
visibly positioned on the appliance. Do not 
remove this plate for any reason.
Ground the appliance using a wire that is 
20 mm longer than the other wires. The 
appliance is provided with a five-core 
H07RN-F cable (5 x 4 mm² referring to the 
cross section of the internal conductor).

Connection modes:

•  380-415 V 3N~

5 x 4 mm² five-core cable.

Fixed connection

Fit the power line with an all-pole circuit 
breaker in compliance with installation 
The circuit breaker should be located near 
the appliance and in an easily reachable 

Connection with plug and socket

To connect:

380-415 V 3N~

with 5 x 4 mm² five-core cable.

Check that the plug (not supplied) and 
power socket are compatible and of 
adequate capacity for the maximum current 
draw of the appliance.
Avoid using adapters and shunts as these 
could cause overheating and a risk of 

(Example of 32A plug and socket)

The terminal indicated by symbol 

 links up parts that are normally 

earthed. Connect the appliances 
appropriately using this terminal in 
order to make sure that they are 

If the phase voltage drops below 
190V~, the performance of the 
oven may suffer, not due to the 
product itself.

The values indicated above refer 
to the cross-section of the internal