Installation

41

EN

5 Installation

5.1 Electrical connection

General information

Check the grid characteristics against the 
data indicated on the plate. The 
identification plate bearing the technical 
data, serial number and brand name is 
visibly positioned on the appliance. Do not 
remove this plate for any reason.
Perform the ground connection using a wire 
that is 20 mm longer than the other wires.

The appliance is provided with a five-core 
H07RN-F cable (5 x 2.5 mm² referring to 
the cross section of the internal conductor).

Connection modes:

•  380-415 V 3N~

5 x 2.5 mm² five-core cable.

Fixed connection

Fit the power line with an omnipolar circuit 
breaker in compliance with installation 
regulations.
The circuit breaker should be located near 
the appliance and in an easily reachable 
position.

Connection with plug and socket

To connect:

380-415 V 3N~

with 5 x 2.5 mm² five-core cable.

Check that the plug (not supplied) and 
power socket are compatible and of 
adequate capacity for the maximum current 
draw of the appliance.

The terminal indicated by symbol 

 links up parts that are normally 

earthed. Connect the appliances 
appropriately using this terminal in 
order to make sure that they are 
equipotential.

If the phase voltage drops below 
190V~, the performance of the 
oven may suffer, not due to the 
product itself.

The values indicated above refer 
to the cross-section of the internal 
conductor.