OVEN INSTALLATION MANUAL
1. Do not slide oven across floor. Damage to floor covering
or floor could result.
2. The oven support surface must be a minimum 3/4" (2cm)
thick plywood platform.
For single ovens, it must support 202 pounds.
For double ovens, it must support 379 pounds. The
platform must be solid, level and flush with the bottom of
the cabinet cut out.
3. Use extreme caution when moving or installing the oven.
It is very heavy.
DO NOT LIFT THE OVEN BY THE DOOR HANDLE,
remove the door for easier handling and installing.
See REMOVING THE DOOR in the maintenance section
of the Use Care Manual.
Be very careful when moving or installing the oven to
avoid damage to the oven frame or damage to the cabinets.
5. Be sure to level the oven. An oven that is not level may
provide poor or inconsistent baking results.
6. Be careful when placing oven. DO NOT pinch the conduit
between the oven back.
Before installing or removing, turn power OFF at the service
panel. Lock service panel to prevent power from being turned
Securely fasten oven to cabinet
using the screws provided.
Failure to do so could result in oven moving or tipping
during use and causing damage to the oven or cabinets or
Know how to disconnect the power to the oven at the circuit
breaker or fuse box in case of an emergency.
Unit is heavy and requires at least two people or proper
equipment to move.
Floor Bottom of Cutout
(1,3 cm) min
(1,3 cm) min
Electrical Ratings and Maximum Connected Load
For cutout dimensions see following section titled:
16,9 3,84 17,5 3,54
33,8 7,68 32,4 6,48
@ 120/240 Volts 60Hz
@ 120/208 Volts 60Hz