EN 

9

 

Mounting the hood body 

•  Before attaching the hood body, tighten the two screws Vr lo-

cated on the hood body mounting points. 

•  Hook the hood body onto the screws 12a. 
•  Fully tighten support screws 12a. 
• Adjust screws Vr to level the hood body. 

 
 

Note: The Hood body should be secured to wall studs. If neces-
sary, install a wood support behind the dry wall, flush mounted 
between 2 studs. This will provide the necessary structure and 
support for mounting. 

 

12a

Vr

Connections 

DUCTED VERSION AIR EXHAUST SYSTEM 

When installing the ducted version, connect the hood to the 
chimney using a rigid 6” duct. 
 
•  Install the damper 10 ø 6”. 
•  Fix the duct in position using sufficient pipe clamps (not sup-

plied). 

 

10

 

DUCTLESS VERSION AIR OUTLET 

•  Push fit connection 15 onto the hood body outlet. 
•  Insert the connection extension pieces laterally 14.1 in connec-

tion 15. 

•  Make sure that the outlet of the extension pieces 14.1 is hori-

zontally and vertically aligned with the chimney outlets. If this 
is not the case, adjust the position by either reversing the con-
nection extension pieces 14.1 and then reassemble as described 
previously. 

•   Ensure that the activated charcoal filters have been inserted. 

 

14.1

15