EN 

5

 

 
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO 
PERSONS, OBSERVE THE FOLLOWING: Installation Work And Electrical Wiring Must Be 
Done By Qualified Person(s) In Accordance With All Applicable Codes And Standards, In-
cluding Fire-Rated Construction. 
 
Sufficient air is needed for proper combustion and exhausting of gases through the flue 
(chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment 
manufacturer’s guideline and safety standards such as those published by the National Fire 
Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air 
Conditioning Engineers (ASHRAE), and the local code authorities. 
 
When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden 
utilities. 
 
Ducted fans must always be vented to the outdoors. 
 

W A R N I N G 

•  

Electrical ground is required on this rangehood.

 

•  If cold water pipe is interrupted by plastic, nonmetallic gaskets or other materials, DO 

NOT use for grounding.

 

•  DO NOT ground to a gas pipe.

 

•  DO NOT have a fuse in the neutral or grounding circuit. A fuse in the neutral or ground-

ing circuit could result in electrical shock

 

•  Check with a qualified electrician if you are in doubt as to whether the rangehood is prop-

erly grounded.

 

•  Failure to follow electrical requirements may result in a fire.