Instructions for the User

17

9. EXTRAORDINARY MAINTENANCE

The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals,
bulbs, and so on. The following instructions describe how to carry out these minor maintenance
operations.

  WARNING

ELECTRICAL SHOCK HAZARD

Before any maintenance operation, disconnect the power supply of the
appliance.

9.1 Replacing oven light bulbs 

Remove the bulb protector A by turning counter-clockwise
and replace bulb B  with a similar one. Put bulb protector A
back on. 

NOTE:  use only oven bulbs (T 600°F - 300°C)

9.2 Removing the oven door 

9.2.1 With type 1 moveable levers 

With the door completely open, lift the levers A  until they
touch hinges B, then grip the two sides of the door with
both hands close to the hinges. Raise the door to an angle
of about 45° and remove it. If the hinges don't lock, repeat
the operation, raising the levers and keeping the door
slightly raised. To remount the door, fit the hinges B  into
their grooves, then lower the door into place, making sure
that it remains in the grooves C, then lower the levers A. 

9.2.2 Removing doors with pins 

Open the door completely and insert the pins (supplied) into the slots from the inside. Close the door to an angle of
about 45° and lift it to remove it. To remount the door, fit the hinges into their grooves, then lower the door into place
and extract the pins. In case you lose the pins, two screwdrivers can also be used.