Energy consumption, indicator, Cookware check

en    Energy consumption indicator

26

[

Energy consumption 

indicator

Energy co

nsumption 

indicator

This function indicates the total amount of energy 

consumed by this hob the last time it was used for 

cooking.
Once switched off, the energy consumption in kWh is 

displayed for 10 seconds.
The picture shows an example with an energy 

consumption of 

.

‹‰

 kWh.

You can find out how to switch this function on in the 

section on ~ "Basic settings"

t

Cookware check

Cookware c

heck

This function can be used to check the speed and 

quality of the cooking process depending on the 

cookware.
The result is a reference value and depends on the 

properties of the cookware and the hotplate being used.

1.

With the cookware still cold, fill it with approx. 

200 ml of water and place it on the centre of the 

hotplate with the diameter that most closely matches 

that of the base of the cookware.

2.

Go to the basic settings and select the 

™‚ƒ

 setting.

3.

Touch the settings range. 

A

 will flash on the hotplate 

display. 

The function has now been activated.

After 10 seconds, the result for the quality and speed of 

the cooking process will appear on the hotplate display.

Check the result using the following table:

To reactivate this function, touch the settings range.

Notes

The flexible cooking zone only counts as a single 

hotplate; place no more than one item of cookware 

on it.

If the diameter of the hotplate used is much smaller 

than the diameter of the cookware, only the middle 

of the cookware can be expected to heat up. This 

may result in the cooking results not being as good 

as expected or being less than satisfactory.

You can find information on this function in the 

section on ~ "Basic settings".

You can find information on the type, size and 

positioning of the cookware in the sections on 
~ "Induction cooking" and ~ "Flex Zone".

Result

The cookware is not suitable for the hotplate and will therefore 

not heat up.*

The cookware is taking longer to heat up than expected and the 

cooking process is not going as well as it should.*

ƒ

The cookware is heating up correctly and the cooking process 

is going well.

* If there is a smaller hotplate available, test the cookware again on the

smaller hotplate.