Attaching and aligning the appliance, Connecting the pipes, Attaching the flue duct

 Installation  en

15

Attaching and aligning the appliance

1.

First, remove the protective foil from the back of the 

appliance and, following installation, remove the foil 

completely.

2.

When attaching the appliance, ensure that it 

engages firmly with the brackets. 

«

3.

Align the appliance horizontally by turning the 

brackets. If required, the appliance can be moved to 

the right or left. 

¬

4.

Firmly tighten the screws for the brackets. When 

doing so, hold the brackets securely in place. 

®

5.

Firmly tighten the knurled nuts. 

¯

Connecting the pipes

Note: 

If using an aluminium pipe, smooth the 

connection area beforehand.

Exhaust-air pipe Ø 150 mm (recommended size)
Attach the exhaust-air pipe directly to the air-pipe 

connector and seal.

Exhaust-air pipe Ø 120 mm

1.

Attach the reducing connector directly to the air-pipe 

connector.

2.

Attach the exhaust air pipe to the reducing 

connector. 

3.

Seal both joints appropriately.

Attaching the flue duct

:

Warning

Risk of injury!

From sharp edges during installation. Always wear 

protective gloves while installing the appliance.

1.

Separate the flue ducts. 

To do this, remove the adhesive tape.

2.

Remove the protective foil from both flue ducts.

3.

Push one flue duct into the other.

Notes

– To prevent scratches, lay paper over the edges of 

the lower flue duct to protect the surface.

– Slots of the inner flue duct point downwards.

4.

Place flue ducts on the appliance.

5.

Push the inner flue duct upwards and attach it to the 

fixing brackets on the left and right. 

¨

6.

Press the flue duct downwards until it engages. 

©

7.

Screw the flue duct to the sides of the fixing bracket 

using two screws. 

ª

'

(

)

*

[

$

%

&