Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
For adjusting the contrast level
For adjusting the brightness of an image
For adjusting the color intensity of the image
For adjusting the tones of an image
For making sharper or softer the contour of an image
For adjusting the redness level
For adjusting the blue level
For adjusting the color temperature of an image
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
temperature for warmer,
For more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
temperature for cooler,
Adjust the Picture menu
For adjustments, see page
“Color”, “Tint” and “Sharp” are not dis-
played when selecting INPUT 1 and the
“Signal Type” is “RGB” .
The picture adjustments can be stored
separately in each input mode.
When the signal type in INPUT 1 has
been set to Component, “Sharp” can be
adjusted when 480I, 480P, 720P or 1080I
signals are connected.
To reset all adjustment items, select “Re-
set” and press
Selecting the Signal Type
This function allows you to select the input
signal type RGB or Component for INPUT1.
Select “Signal Type” in the “Picture”
➝ For settings, see page
Set when RGB signals are received.
Set when Component signals are received.