Making General Settings for the Network, Setting for Sending E mail when an Error Occurs

-20
Making General Settings for 
the Network 
(Network - General)
On this screen, you can make general 
settings relating to the network.
Items
Description
Projector 
Name
Setting the projector name.
Auto Logout 
Time
Setting the time interval in which the 
projector will be automatically 
disconnected from the network in units 
of a minute (from 1 to 65535 minutes). 
If the set value is made 0, the Auto 
Logout function is disabled.
Data Port
Setting the TCP port number used 
when exchanging data with the 
projector (from 1025 to 65535).
Search Port
Setting the port number used when 
searching for the projector (from 1025 
to 65535).
After clicking the “Apply” button, the set 
values appear. Confi rm that the values are 
set properly, and then click the “Confi rm” 
button.
After setting items, wait for about 15 seconds 
and then re-access.
Projector Name can be up to 12 characters.
You can input the characters below:
A-Z, 0-9, -, _, (,), space
(When “a-z” are input, they are converted to 
“A-Z” automatically.)

Note
Setting for Sending E-mail 
when an Error Occurs 
(Mail – Originator Settings)
On this screen, you can make settings for 
sending e-mail to report when the 
projector has generated an error.
Items
Setting example / Remarks
SMTP Server
Setting an SMTP server address for e-
mail transmission.
e.g.1: 192.168.150.253
e.g.2: smtp123.sharp.co.jp
*  When using a domain name, make 
settings for the DNS server.
Originator E-
mail Address
Setting the projector's e-mail address. 
The e-mail address set here becomes 
Originator E-mail Address.
Originator 
Name
Setting the sender's name.  The name 
set here appears in the “Originator 
Name” column of the body of the 
message.
SMTP Server, Originator E-mail Address and 
Originator Name can be up to 64 characters.
You can input the characters below:
SMTP Server and Originator E-mail Address: 
a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, |, }, 
~, _, ', ., @, `
(You can input “@” only one time for “Originator 
E-mail Address”.)
Originator Name : a-z, A-Z, 0-9, -, _, (,), space
If the settings of “3. Setting up a Network 
Connection for the Projector” on pages 
15
and 
16
 are incorrectly set, e-mail will not be 
sent.
Note
Controlling the Projector via LAN