Refe, rences, Troubleshooting chart continued

05/9/14
HT-X1(LA)E7.fm
E-63
ENGLISH
TINSZA077SJZZ
HT-X1
Refe
rences
Troubleshooting chart (continued)
Tuner
 
Remote control
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet
(laser pickup, etc.) or on the transmitter on the remote control.
Condensation may cause the system to malfunction. If this hap-
pens, leave the power on with no disc in the system until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the system.
 
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
Set the system to the stand-by mode and turn the power on
again.
2
If the system is not restored in the previous operation, unplug and
plug in the subwoofer/amplifier unit, and then turn the power on.
Note:
If neither operation above restores the system, clear all the memory
by resetting it.
 
Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
Whilst pressing down the   button and the FUNCTION button,
press the ON/STAND-BY button until "SYS RESTORE"
appears.
Caution:
When you reset, all data is deleted and the settings return to the
default. (DVD initial settings are retained.)
Symptom
Possible cause
The radio makes 
unusual noises 
continuously.
Is the system placed near the TV or comput-
er?
Is the FM aerial or AM loop aerial placed 
properly? Move the aerial away from the AC 
power lead if it's located nearby.
The preset chan-
nel cannot be re-
called.
Did you remove the plug from the wall sock-
et, or did a power failure occur?
Set the channel again.
Symptom
Possible cause
The remote con-
trol does not op-
erate.
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incorrect?
Are there any obstructions in front of the 
main unit?
Is the remote control sensor exposed to 
strong light (inverter fluorescent light, direct 
sunlight, etc.)?
Is the remote control for another equipment 
used simultaneously?
The system can-
not be turned on 
with the remote 
control.
Is the AC power lead of the subwoofer/ampli-
fier unit plugged in?
Are the batteries inserted?