FO-IS110N QUICK SETUP GUIDE
Connect the phone line cord
to the TEL. LINE socket and
a wall socket.
Attach the trays.
Make sure you have the following items.
If any are missing, contact your dealer.
Install the toner cartridge and drum cartridge.
4. Remove the drum cartridge from its
packaging. Insert the cartridge into
the print compartment, sliding it along
5. Remove the toner cartridge from its
packaging. Shake the cartridge side
to side four or five times as shown.
6. Insert the toner cartridge into the
print compartment, sliding it along
the guides until it clicks into place.
(This resets the
toner cartridge counter.)
9. Reset the drum cartridge counter:
, and then
[LIFE] appears in the display.
7. Close the side cover
, the front cover
, and the top cover
PRINTED IN THAILAND
1. Open the top cover of the machine.
Plug the power cord into a
220-240 V, earthed AC outlet.
For detailed instructions
on setting up and using the FO-IS110N, see the
online guide on the CD-ROM.
To open the manual, insert the CD-ROM in your
CD-ROM drive and click “Browse CD
Contents” in the screen that appears. Double-
click the Manual folder, the Thailand folder, the
Thai or English folder depending on which
language you prefer,
and then double-click
FO-IS110N Online Manual.pdf.
(Note: Adobe Reader is required to view the
manual. To install Adobe Reader, double-click
the Adobe Reader folder on the CD-ROM and
then double-click AdbeRdrxxx_en_US.exe.)
Connect the handset.
2. Press the release
open the front cover
3. Open the side cover.
Do not touch the
inside of the print
the machine has
been in operation.
Parts of the print
become very hot.
Insert trays at an
angle and rotate back
All company names and product names appearing
in this setup guide are the trademarks of their
Grasp this handle to
insert the cartridge
Do not expose the drum to light
for more than several minutes.
Do not touch the green cylinder.