EL 6053, EL 6810

Part Names
• Yellow colored functions are operated by
pressing 
SHIFT
 (“SHIFT” is turned on) and the
appropriate keys.
• In this manual, only the display symbols
necessary for explanation of this product are
shown.
q
w
e
t
Using the Organizer for the First Time
Be sure to perform the following operations
before using the Organizer for the first time.
1. Remove the isolating film that is affixed to the
battery holder on the back of the unit.
2. Press the RESET switch with a ball-point pen
or similar object.
“RESET?” is displayed.
3. Press 
SHIFT
 
ENTER
 to initialize the
Organizer.
After “RESET!” is displayed, Home clock is
displayed. (See “Clock Mode”.) You have
deleted all the memory contents now.
NOTES
• If the Organizer is subjected to strong,
extraneous electrical noises or shocks during
use, an abnormal condition may occur in which
no keys (including 
ON
OFF
 ) will respond. Press
the RESET switch and press 
SHIFT
 
ENTER
 to
delete all the memory contents.
• To minimize battery consumption, the Organizer
is designed to automatically turn off when no
key has been pressed for approximately 7
minutes.
• The key touch tone is turned on and off by
pressing 
SHIFT
 
. When the tone is turned
on, “
” is turned on.
Entering Characters
• Alphanumeric letters, symbols, and “+ – 
×
 ÷ .”
can be entered into the dot display area (the 1st
line).
• Numbers and some characters (only space, –,
and F and P in Telephone mode) can be entered
into the number display area (the 2nd and the
3rd lines).
• Basically letters are entered in capital letters
(“CAPS” is turned on). To enter small letters,
press 
CAPS
 to turn “CAPS” off.
Entering symbols and letters with an accent
mark
• To enter a symbol, press 
SMBL
 repeatedly until
the desired symbol appears:
@#$£¥
( )~’: / \_&<>ß!?¡¿
• To enter a letter with an accent mark, press
SHIFT
 
SHIFT
 to turn “SHIFT LOCK” on, and
press the appropriate key repeatedly. (Refer to
the “QUICK REFERENCE GUIDE” inside the
cover.)
• To turn “SHIFT LOCK” off, press 
SHIFT
 again.
Making corrections
Move the cursor to the character to be corrected.
Enter the correct character to replace the previous
one.
Cursor
The cursor (_) indicates the position for entering a
character. Move the cursor with the cursor keys
(
 
 
 
).
Inserting characters
Each time 
INS
 is pressed, a space is inserted at
the cursor position to allow you to enter a
character.
Deleting characters
Press 
DEL
 to delete the character at the cursor
position.
Press 
C•CE
 to clear all the characters that you
have entered and not stored yet.
For EL-6810 only: Press 
BS
 to delete the
character at the left of the cursor.
q Power ON/OFF key
w Cursor keys
e Search keys
r RESET switch
t Mode keys
The following notations are used for
key operations.
CM
: Clear memory
(in Calculator mode)
U
: Letter “U”
SHIFT
 
: Turn the touch
tone on and off
V
: Letter “V”
Telephone Mode
Telephone mode is composed of two files, TEL1
(“1” is turned on) and TEL2 (“2” is turned on).
Use these files for convenience, e.g. business
and private files.
A telephone entry consists of name, address,
E-mail address, and number fields.
For EL-6810 only:
• Moreover, EL-6810 has the web address (URL)
field that follows the E-mail address field.
• Instead of pressing 
TEL
 once or twice in the
following operations, press 
TEL1
 or 
TEL2
 once.
Storing telephone entries
1. Press 
TEL
 once or
twice to display the
Telephone mode
screen (in this case,
TEL1).
2. Enter the name, e.g. SMITH 
SPACE
 ROBERT,
and press 
ENTER
.
3. Enter the address, e.g. 18 
SPACE
 EAST
SPACE
 ROAD, and press 
ENTER
.
4. Enter the E-mail
address, e.g.
SROB 
SMBL
(to enter “
@
”)
SHARPSEC.COM, and press 
ENTER
.
• The E-mail address is automatically entered
in small letters.
For EL-6810 only:
• To enter “
@
”, simply press 
@
 instead of
SMBL
.
• After entering the E-mail address and
pressing 
ENTER
, enter the web address
(URL), e.g. WWW.SHARP-USA.COM, and
press 
ENTER
.
Schedule Mode
Schedule mode is used for storing schedule
details (36 characters or under), date and time
(year, month, day, hour, and minute).
In the 1st line the same characters are allowable
as in Telephone mode.
1. Storing schedule entries
1. Press 
SCHEDULE
 to
display the Schedule
mode screen.
2. Enter the details and
press 
ENTER
.
3. Enter the date and time.
• The types of date and time are the same as
the types set for the clock.
• To enter a single-digit date or time, enter “0”
and the digit (e.g. “O2”).
Memo Mode
Notes or other pieces of information that are not
appropriate for Telephone or Schedule mode can
be entered for convenience.
In the 1st line the same characters are allowable
as in Telephone mode. In the 2nd and the 3rd
lines you can enter numbers, –, and space. (36
characters or under can be entered in each line.)
Storing memo entries
1. Press 
MEMO
 to
display the Memo
mode screen.
2. Enter the memo item
and numbers.
E.g. UNION 
SPACE
BANK 
ENTER
01 
272-0011223
3. Press 
ENTER
 to store in the memory.
Notes for storing and recalling entries
• When the memory is full, “MEMORY FULL!”
appears briefly, and the entry cannot be stored.
• When the symbol “ ” or “ ” is turned on,
more information exists. Press 
 or 
 to
switch the display.
Checking details of entries in Telephone mode
• To display each field on the 1st line, follow the
symbol “ ” or “ ” and press 
 or 
. (The
symbol above the 1st line shows each field.)
• Pressing 
E-MAIL
 displays the E-mail address
on the 1st line directly.
For EL-6810 only: Pressing 
E-MAIL
 (
WWW
)
again displays the web address (URL) on the
1st line. Each time you press 
E-MAIL
 (
WWW
),
the display switches between the E-mail and the
web addresses.
• Press and hold 
 to start the auto scroll on the
1st line. Press 
 again to stop or restart the
scroll. Press 
C•CE
 to quit the auto scroll.
Guidance messages can be displayed in 7
languages – English, Dutch, Portuguese, Italian,
German, French, and Spanish. After initializing the
Organizer, the default setting is English.
Changing the Guidance Language
To change the language, press 
SHIFT
 
LANGUAGE
followed by 
PREV
 or 
NEXT
 to select the desired
language, then press 
ENTER
.
5. Enter the phone
number, and then
the fax number if
needed, e.g.
012-3456-7890 
SPACE
 
SPACE
 
SPACE
 3456-7891, and
press 
ENTER
.
• “STORED!” appears briefly, then the Telephone
mode screen is displayed. The telephone entry
is now stored.
Notes
• The symbol “NAME”, “ADDRESS”, or “E-mail”
(or “URL” for EL-6810 only) is turned on while
entering in each field.
• To skip entry of an address, E-mail address,
(web address (URL),) or number, press 
ENTER
when “ADDRESS?”, “E-MAIL?”, (“URL?”,) or
“NUMBER?” is displayed. However, entering a
person’s name cannot be skipped.
Allowable
characters
The 1st line:
Name, address,
E-mail address
(and web address
(URL) for EL-6810
only)
Field
Number of
characters
The 2nd and the
3rd lines:
Phone number
36 characters
or under
Alphabetic letters,
numbers, symbols,
“+ – 
×
 ÷ .”, space
Numbers, space, –,
F (Fax), P (Pager)
PRINTED IN CHINA/IMPRIMÉ EN CHINE
00BTO (TINSE0355EHZZ)
EL-6053/6810
English
Front sheet
OPERATION MANUAL
ELECTRONIC ORGANIZER
EL-6053
EL-6810
In Europe:
This equipment complies with the requirements of
Directive 89/336/EEC as amended by 93/68/EEC.
Dieses Gerät entspricht den Anforderungen der EG-
Richtlinie 89/336/EWG mit Änderung 93/68/EWG.
Ce matériel répond aux exigences contenues dans la
directive 89/336/CEE modifiée par la directive 93/68/
CEE.
Dit apparaat voldoet aan de eisen van de richtlijn 89/336/
EEG, gewijzigd door 93/68/EEG.
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC
med tillæg nr. 93/68/EEC.
Quest’ apparecchio è conforme ai requisiti della direttiva
89/336/EEC come emendata dalla direttiva 93/68/EEC.
Η εγκατάσταση αυτή ανταποκρίνεται στισ απαιτήσεισ
των οδηγιών τησ Ευρωπαïκήσ Ενωσησ 89/336/ΕΟΚ,
πωσ ο κανονισµ σ αυτ σ συµπληρώθηκε απ  την
οδηγία 93/68/ΕΟΚ.
Este equipamento obedece às exigências da directiva 89/
336/CEE na sua versão corrigida pela directiva 93/68/
CEE.
Este aparato satisface las exigencias de la Directiva 89/
336/CEE modificada por medio de la 93/68/CEE.
Denna utrustning uppfyller kraven enligt riktlinjen 89/336/
EEC så som kompletteras av 93/68/EEC.
Dette produktet oppfyller betingelsene i direktivet 89/336/
EEC i endringen 93/68/EEC.
Tämä laite täyttää direktiivin 89/336/EEC vaatimukset,
jota on muutettu direktiivillä 93/68/EEC.
Notes
• While operations are described mainly  for EL-
6053, unless otherwise specified, the text
materials apply to both models. In case of need,
the operations are described as “For EL-6810
only:”.
• One of the models described in this  manual
may not be available in some  countries.
EL-6053
EL-6810
3. Using World clock
1. Press 
CLOCK
 once or twice to display World
clock (without “
”).
2. Press 
PREV
 or 
NEXT
 to select the desired
city.
4. Changing the cities between Home
and World clocks
You can change the home city for a city in another
time zone without adjusting the stored correct
time.
1. Press 
CLOCK
 once or twice to display World
clock (without “
”).
2. Press 
PREV
 or 
NEXT
 and select the desired
city to be set as the new home city.
3. Press 
SHIFT
 
SET
 to change the cities
between Home and World clocks.
• The previous home city is now set as the
world city (without “
”).
4. Press 
CLOCK
 to check the home city.
• The selected city in step 2 is set as the home
city (with “
”).
5. Press 
CLOCK
 to recheck the world city,  and
press 
PREV
 or 
NEXT
 to select the new world
city, if needed.
5. Setting daylight saving time (DST:
summer time)
1. Press 
CLOCK
 once or twice to display Home
or World clock.
2. Press 
DST
.
“#” is displayed. The time is set 1 hour ahead.
To clear DST, press 
DST
 to clear “#”. The time
is set 1 hour behind.
Notes
• DST can be set independently in either Home or
World clock.
• When DST is set for one world city, it is used
for all cities displayed in World clock.
6. Setting alarms
The Organizer has 3 kinds of alarm:
1. Daily alarm ........ beeps every day at the alarm
time (for 1 minute), when
” is turned on.
2. Hourly alarm ...... beeps every hour when
minutes reach “00”, when
” is turned on.
3. Schedule alarm .. beeps at the time for all the
schedule entries (for 1
minute), when “
” is
turned on. (Refer to
“Schedule Mode”.)
Press any key to stop the alarm beeping.
Setting/Changing the daily alarm time
1. Press 
CLOCK
 once or twice to display Home
clock (with “
”).
2. Press 
ALARM
 to
display the daily
alarm screen.
(The display differs
between the 12-hour and 24-hour clock.)
3. Press 
SHIFT
 
SET
.
4. Enter the time.
5. Press 
ENTER
.
• The daily alarm time is set.
Turning the alarms on and off
An alarm sounds only when the respective symbol
(
, or 
) is turned on.
Display Home clock (press 
CLOCK
 once or twice)
and press 
ALARM
 to display the daily alarm
screen.
Each time you press 
ALARM
 while the daily alarm
screen is displayed, the combination of symbols
switches.
Note
• Alarms sound even when the Organizer is
turned off.
Recalling entries – Telephone, Schedule, Memo –
First press the desired mode key.
NEXT
 : Recalls entries in forward order
PREV
 : Recalls entries in reverse order
Sequential search
Press 
NEXT
 or 
PREV
 in each mode.
Direct search
• Enter the first characters (7 characters or
under) of the person’s name, schedule details,
or memo item, and press 
NEXT
 or 
PREV
.
Then press 
NEXT
 or 
PREV
 to continue
performing a direct search.
Sorting order
• Telephone and memo entries are stored by the
first character of the person’s name or memo
item in the following order (case sensitive):
• Schedule entries are stored by date and time.
Note
• When there is no (further or relevant) entry to
be recalled, “NOT FOUND!” appears briefly, and
the display returns to the mode screen.
r
q
w
e
t
r
ALARM
A12–00
NAME?
har
p
sec.com_
NUMBER?
2–3456–7890
  3456–7891_
SCHEDULE?
4. Press 
ENTER
 to store in the memory.
Notes
• Schedules for the following dates can be stored:
January 1901 to December 2098.
• If an attempt is made to store an entry without a
date or time, or with an invalid date or time,
“ERROR!” appears briefly. Enter the correct
date and time and press 
ENTER
.
2. Alarm for Schedule mode
When the schedule alarm (“
”) is turned on, it
is set for all the schedule entries. Beeping sounds
for 1 minute when the time for a schedule entry is
reached. Press any key to stop the alarm. The
schedule alarm cannot be set for an individual
entry.
MEMO?
UNION BANK
01
272–0011223_
Clock Mode
Each time you press 
CLOCK
, the clock switches
between Home and World clocks. (For World
clock, “
” is not displayed.)
1. Before setting the clock
• The default setting for the date is “YYYY/MM/
DD” (year-month-day). To change the setting to
“MM/DD/YYYY” (month-day-year) or “DD/MM/
YYYY” (day-month-year):
1. Press 
CLOCK
 once or twice to display
Home clock (with “
”).
2. Press 
SHIFT
 
DATE TYPE
.
3. Press 
PREV
 or 
NEXT
 to select the desired
type.
4. Press 
ENTER
 to store the new setting.
• To change the 12-hour clock to the 24-hour
clock, press 
12      24
 (“A” or “P” is cleared).
Each time you press 
12      24
, the clock
switches.
• In the period of daylight saving time/summer
time, press 
DST
 in advance (“#” is displayed).
2. Setting the clock
1. Press 
CLOCK
 once or twice to display Home
clock (with “
”).
2. Press 
SHIFT
 
SET
 to start setting.
The cursor starts to flash on the city name.
Home clock
Home city (with “
”)
Day of the week
Time
Date
3. Press 
PREV
 or 
NEXT
 to select the desired
time zone. (Refer to the list of cities described
below.)
• Enter the city name, if needed (6 characters
or under). Only one changed name for Home
clock can be stored.
4. Press 
 to move the cursor to the year.
5. Enter the year (4 digits), the month, and the
day (2 digits each).
• The built-in calendar extends from January
1st, 1901, to December 31st, 2098.
6. Press 
AM•PM
 to select “A” (morning) or “P”
(afternoon) for the 12-hour clock.
7. Enter the time (hours and minutes).
Note: P12-00: noon, A12-00: midnight
8. Press 
ENTER
. The clock starts from “00”
seconds.
Notes
• To enter a single-digit date or time, enter “0”
and the digit (e.g. “02”).
• If you enter an invalid date or time, “ERROR!”
appears briefly. Enter the correct date and time
and press 
ENTER
.
 LON     MON
 2001– 1– 1
 A12–00–00
Zone Display
City
Zone Display
City
No.
No.
0
TNG
TONGA
10
MOW MOSCOW
1
WLG
WELLINGTON
11
CAI
CAIRO
2
NOU
NOUMEA
12
PAR
PARIS
3
SYD
SYDNEY
13
LON
LONDON
3.3
ADL
ADELAIDE
14
AZ0
AZORES ISLANDS
4
TYO
TOKYO
15
-2H
2hrs behind LON
5
HKG
HONG KONG
16
RIO
RIO DE JANEIRO
6
BKK
BANGKOK
17
CCS
CARACAS
6.3
RGN
YANGON
18
NYC
NEW YORK
7
DAC
DHAKA
19
CHI
CHICAGO
7.3
DEL
NEW DELHI
20
DEN
DENVER
8
KHI
KARACHI
21
LAX
LOS ANGELES
8.3
KBL
KABUL
22
ANC
ANCHORAGE
9
DXB
DUBAI
23
HNL
HONOLULU
9.3
THR
TEHRAN
24
MID
MIDWAY
SHARP assumes no responsibility, directly or
indirectly, for financial losses or claims from
third persons resulting from the use of this
product and any of its functions, such as stolen
credit card numbers, loss or alteration of stored
data, etc.
The information provided in this manual is
subject to change without notice.
NOTICE
SHARP strongly recommends that separate
permanent written records be kept of all
important data. Data may be lost or altered in
virtually any electronic memory product under
certain circumstances. Therefore, SHARP
assumes no responsibility for data lost or
otherwise rendered unusable whether as a
result of improper use, repairs, defects, battery
replacement, use after the specified battery life
has expired, or any other cause.
¨
¨
¨
¨
EL-6053/6810,E.E65
3/6/2000, 3:34 PM
1