REFERENCE
43
Specifications
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
Power Requirements
Power Consumption
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
(COMPACT DISC)
VCD : 12Cm
Composite Video
Component Video
S-VIDEO
2 channel
*Frequency Response
*S/N Ratio  
*Dynamic Range 
*Total Harmonic Distortion 
AC 110-240V, 50/60 Hz   
12 W
2.1 Kg
430mm (W) X 49.5mm (H) X 237mm (D) 
+5°C to +35°C
10 % to 75 %
Reading Speed : 3.49 m/sec
.
Approx. Play Time 
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 1.2 to 1.4 m/sec.
Maximum Play Time : 74 min.
Reading Speed :  1.2 to 1.4 m/sec.
Maximum Play Time : 20 min.
Reading Speed :  1.2 to 1.4 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 
Ω load)
Y : 1.0 Vp-p (75 
Ω load)
Pr : 0.70 Vp-p (75 
Ω load)
Pb : 0.70 Vp-p (75 
Ω load)
Luminance Signal : 1.0 Vp-p (75 
Ω load)
Chrominance Signal : 0.286 Vp-p (75 
Ω load)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
100 dB
0.004 %
General
Disc
Video
Output
Audio
Output
Troubleshooting
Before requesting service (troubleshooting), please check the following.
No operations can be
performed with remote.
The screen ratio cannot
be changed.
No audio.
Play mode differs from the
Setup Menu selection.
Disc Menu doesn’t appear.
The      icon appears on
screen.
Forgot password
If you experience other
problems.
5.1 channel sound is not
being reproduced. 
Disc does not play.
•  Check the batteries in the remote. May need replacing.
•  Operate the remote control at a distance of no more than 20 feet.
•  Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
•  Ensure that the disc is installed with the label side facing up.
•  Check the region number of the DVD.
•  5.1 channel sound is reproduced only when the following conditions
are met. : 
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
•  Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
•  Check if your audio system is connected and working properly.
•  In a SETUP Menu, is the Audio Output set to Bitstream?
•  The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
•  Check if the disc has a Menu.
•  Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
•  The Screen Ratio is fixed on your DVDs.
•  Make sure you have selected the correct Digital Output in the Audio 
Options Menu.
•  Press power on from a cold start with no disc in the unit. Press the
STOP (      ) and PLAY (       ) buttons simultaneously on the front panel
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
•  Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
•  If the problem still cannot be solved, please contact your nearest
authorized service center.
Action
Problem
Page
P4
P7
P12
P38
P15
P35~41
P39~40
P38
P41
42
 00228J/DVD-E218-2  9/3/03 9:58 AM  Page 42