Supplied cables used in this connection are as follows:
• audio cable (L/R) x 1
• video cable x 1
Please purchase the rest of the necessary cables at your local store.
• Connect this unit directly to your TV. If audio / video cables are connected to a VCR, pictures may be distorted due to the copy protec-
• Changing “ Progressive Scan ” setting is not available while HDMI cable is connected.
If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set “Progressive
Scan” to “On” in “Video” menu. Refer to page 23 for more details.
• When “Progressive Scan” is “On”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “Progressive Scan” to “Off” in “Video” menu or by pressing and holding [
B (play)] on the
front of the unit for more than 5 seconds.
• Make one of the following connections, depending on the capabilities of your existing device.
analog audio standard picture
best audio /
This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures than traditional
output system does. To utilize this feature, a component connection is required. Refer to “HDMI Video” or “ Progressive Scan ” setting
on pages 21-22 to set the video resolution.
Analog audio connection is not required for this connection.
Connection to the TV