Lamp power, Remote control, Security, Setting

50

 - ENGLISH

Settings

Lamp power

This function allows you to change brightness of the 

screen.

Press ▲▼ to select [Lamp power] and 

1 ) 

then press the <SELECT> button .
Press ▲▼ to select one among the 

2 ) 

modes as below.

You can also press the <LAMP> button to 

 

z

display [Lamp power].

 High

Brighter than the Normal mode.  

Normal Normal brightness.

Eco

Lower brightness reduces the 

lamp power consumption and 

extends the lamp life.

Remote control

This switching function prevents remote control 

interference when operating several projectors or 

video equipment at the same time.

Press ▲▼ to select [

1 ) 

Remote control].

Press ► or the <SELECT> button.

2 ) 

Press ▲▼ to select one among the 

3 ) 

seven codes. 

This projector provides 7 different remote 

 

z

control codes: [ALL], [Code 1]~[Code 6].

Attention

When operating the projector under [All] code, you can 

 

z

operate several projectors at the same time. If you want 

to operate the projector independently, you must switch 

to other code.

When different codes are set on the projector and on the 

 

z

remote control, any operation cannot be made. In that 

case, switch the code on the remote control to fit the 

code on the projector.

If the batteries are removed from the remote control for a 

 

z

long period of time, the remote control code will be reset.

Security

This function allows you to use the [Key lock] and [PIN 

code lock] function to set the security for the projector 

operation.

Press ▲▼ to select [Security].

1 ) 

Press ► or the <SELECT> button to 

2 ) 

access the submenu.

Key lock

 

J

This function locks the control panel and remote 

control buttons to prevent operation by unauthorized 

persons.

Press ▲▼ to select the desired items 

1 ) 

as below.

Unlocked.

Lock the operation of the control 

panel. To unlock, use the remote 

control.
Lock the operation of the remote 

control. To unlock, use the control 

panel.

PIN code lock

 

J

This function prevents the projector from being 

operated by unauthorized persons and provides the 

following setting options for security.

Press ▲▼ to select the desired items 

1 ) 

as below.

Off

Unlocked.

On1

Enter the PIN code every time 

turning on the projector.

On2

Enter the [PIN code] to operate 

the projector once the power cord 

is disconnected; as long as the 

AC power cord is connected, the 

projector can be operated without 

a PIN code.

Attention

Whenever you change the PIN code lock setting or the 

 

z

[PIN code] (the four-digit number), you are required to 

enter the [PIN code]. The "1234" is set as the initial PIN 

code at the factory.

PIN code change

 

J

The [PIN code] can be changed to your desired four-

digit number.

Press ▲▼ to select [PIN code change] 

1 ) 

and then Press <SELECT> button.

[Current Pin code] dialog box appears.

 

z

Press ▲▼ to enter the current code. 

2 ) 

Press ► button to fix the number and 

move the red frame pointer to the next 

box. 

The [New PIN code] input dialog box appears.

 

z

Setting