Setting, Power management, Direct on, Standby mode, P timer

Setting

48

 - ENGLISH

Settings

Logo PIN code change

 

J

Logo PIN code can be changed to your desired four-

digit number.

Press ▲▼ to select [Logo PIN code 

1 ) 

change].
Press the <SELECT> button.

2 ) 

Current logo PIN code dialog box appears.

 

z

Press ▲▼ to enter the current code.

3 ) 

The New Logo PIN code input dialog box 

 

z

appears. Set a new Logo PIN code, a 

confirmation box appears, choose [Yes] to set 

the new [Logo PIN code].

Attention

Be sure to note the new Logo PIN code and keep it on 

 

z

hand. If you lost the number, you could no longer change 

the Logo PIN code setting. 

Power management

For reducing power consumption as well as 

maintaining the lamp life, the Power management 

function turns off the projection lamp when the 

projector is not operated for a certain period.

Press ▲▼ to select [Power 

1 ) 

management].
Press ► or the <SELECT> button to 

2 ) 

access the submenu.

Mode

 

J

Press ▲▼ and then press the 

1 ) 

<SELECT> button to select one mode 

among the items as below.

Ready When the lamp has been fully cooled 

down, the <STANDBY(R)/ON(G)> 

indicator changes to green blinking. 

In this condition, the projection lamp 

will be turned on if the input signal 

is reconnected or any button on the 

control panel or remote control is 

pressed

Shut 

down

When the lamp has been fully cooled 

down, the power will be turned off.

Off

[Power management] function is off.

Timer

 

J

Press ▲▼ to select [Timer] and then 

1 ) 

press the <SELECT> button.
Press ▲▼ to set the Timer(1~30min).

2 ) 

Direct on

Press ▲▼ to select [Direct on] and 

1 ) 

then press the <SELECT> button.
Press ▲▼ to switch between [On] and 

2 ) 

[Off].

When this function is set to [On], the projector 

 

z

will be automatically turned on just by 

connecting the AC power cord to a wall outlet.

Be sure to turn off the projector properly. If the 

 

z

projector is turned off in the incorrect sequence, 

the [Direct On] function does not work properly.

Standby mode

This function can set the electric power when the 

projector is standing by.

Press ▲▼ to select [Standby mode] 

1 ) 

and then press the <SELECT> button.
Press ▲▼ to switch between the items  

2 ) 

as below.

Eco

Restricts some functions in 

standby mode to reduce power 

consumption.

Serial

Does not restrict functionality 

even in standby mode.

Note

When [Standby mode] is set to [Eco] and the projector 

 

z

is in standby mode, it is only possible to turn on the 

projector while using the RS-232C protocol command. 

P-timer

This function allows you to change the setting of the 

[P-timer] and execute it.

Press ▲▼ to select [P-timer].

1 ) 

Press ► or <SELECT> button to 

2 ) 

access the submenu.