Powering ON OFF, Turning Off the Projector

Powering ON/OFF

ENGLISH - 

27

Basic Operation

Press the <

1 ) 

> button on the control panel or 

the remote control, and 

Power off? appears on 

the screen.
Press the <

2 ) 

> button on the control panel or  

the remote control again to turn off the projector. 

The <STANDBY(R)/ON(G)> indicator starts to 

blink red, and the cooling fans keep running. 

At this time, you can unplug the AC power cord 

even if the fans are still running.
When the projector has cooled down enough, the 

3 ) 

<STANDBY(R)/ON(G)> indicator stops blinking 

and you can turn on the projecto

r.

Note

Do not put the projector in a case before the projector is 

 

z

cooled enough.

While the <

 

z

STANDBY(R)/ON(G)>

 indicator is blinking, 

the lamp is being cooled down and the projector cannot 

be turned on. Wait until the <

STANDBY(R)/ON(G)>

 

indicator stops blinking to turn on the projector again.

The projector can be turned on after the <

 

z

STANDBY(R)/

ON(G)>

 indicator turns red. The waiting time to restart 

will be shortened when the normal power-off processing 

for fan cooling is completed, compared with the time the 

AC power cord is immediately unplugged after the power-

off.

 

J

Direct Power Off function

You can disconnect the power cord from the wall 

outlet or turn off the breaker even during projection 

without pressing <

> button. 

Note

When using the Direct power Off function, you can 

 

z

not restart the projector immediately after the power is 

disconnected. If the external power supply is suddenly 

cut off, the fans stop immediately. The lamp remains high 

temperature and needs to be cooled.

When the lamp has been cooled by the direct power off 

 

z

function, it sometimes takes longer than usual for the 

lamp to light up again.

Turning Off the Projector

Power off? disappears after 4 seconds.