- 4 -

Cautions for Safety

In order to use the LS-1000 safely and correctly, and to prevent
problems, pay careful attention to the following points:

• Use an AC power supply of 50/60Hz and a voltage of from

100V–240V.  Be sure to use a power cord rated for the
appropriate voltage.

At voltages of more than AC 125V:
use a power cord that complies with the safety standards of
the country in which it is used, which has a plug rated for AC
250V, 15A (NEMA 6P-15) and insulation of SVT type or
better, and which is more than AWG18 in thickness.

At voltages of AC 125V or less:
use a power cord that complies with the safety standards of
the country in which it is used, which has a plug rated for AC
125V, 10A and insulation of SVT type or better, and which is
more than AWG18 in thickness.

• Be sure that the electrical outlet of the power supply is

grounded.  Conduct the grounding in common to the other
machines it is being connected with.  Unless common
grounding is conducted, ground loop will occur, which will
cause electric shock and noise static.

• Do not conduct the grounding to a gas pipe or a water pipe.

• When plugging in or unplugging the power cord, be sure to

touch only the plug.