Kodak Ze2 User Guide

Doing more with your camera, Using the camera under water, After using the camera in water

16
www.kodak.com/go/support
3
Doing more with your camera
Using the camera under water
The camera does not float. Secure it to your wrist with 
the strap (see a floating accessory strap at 
www.kodak.com/go/accessories
). To keep the camera 
waterproof, tightly close and latch all doors. Do not 
open doors in water or when hands are wet. 
Waterproof integrity may be compromised if the camera 
is dropped. For more information, 
see page 24
.
For the best focus and color balance under water:
1
Press the Settings button 
, then 
 to 
choose Underwater Correction.
2
Press OK, then 
 to choose Scene mode: 
Water, then press OK.
3
Press the Mode button 
 to take 
videos/pictures.
IMPORTANT: Verify that all doors are tightly closed. This 
camera is waterproof to a depth of 3 metres (9.8 feet).
After using the camera in water
When finished using under water, go to Step 1 and 
turn off Underwater Correction.
Wipe off water or debris. If the camera was used in 
chemically treated water or saltwater, rinse it in 
fresh water, then use a soft towel to dry it. 
If water has entered the camera, remove the card. 
Allow the camera to air-dry for at least 24 hours 
before using.
urg_01305.book  Page 16  Friday, September 23, 2011  1:03 PM