Initializing A Memory Card

ADDITIONAL FEATURES FOR D.S.C.
30 
EN
MasterPage: Left
To Print By Selecting Still Images And 
Number Of Prints
1
Perform steps 
1 – 3 in “To Print All Still 
Images (One Print For Each)”. (
੬ pg. 29)
2
Press 4 or 3 to select 
“CURRENT”, and press 
SET or 2. The DPOF 
screen appears.
3
Press 1 or 2 to select 
the desired file.
4
Press 4 or 3 to select the number indication 
(00), and press SET.
5
Select the number of 
prints by pressing 3 to 
increase the number, or 4 
to decrease the number, 
and press SET.
● Repeat steps 3 through 5 
for the desired number of 
prints.
● The number of prints can be set up to 15.
● To correct the number of prints, select the image 
again and change the number.
6
Press 4 or 3 to select 
“RETURN”, and press 
SET. The “SAVE?” 
appears.
● If you did not change any 
settings in step 
3 through 
5, the DPOF Menu 
reappears.
7
Press 4 or 3 to select “EXECUTE” to save 
the setting you have just made, and press SET.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps 
1 – 3 in “To Print All Still 
Images (One Print For Each)”. (
੬ pg. 29)
2
Press 4 or 3 to select “RESET”, and press 
SET. The DPOF screen appears.
3
Press 4 or 3 to select “EXECUTE”, and 
press SET. The normal playback screen 
appears.
● To cancel selection, select “RETURN”.
● The number of prints is reset to 0 for all still 
images.
CAUTION:
While performing the above, never disconnect 
power, as this may cause the memory card to be 
corrupted. 
You can initialize a memory card any time.
After initializing, all files and data stored in the 
memory card, including those which have been 
protected, are cleared.
1
Set the VIDEO/MEMORY Switch to 
“MEMORY”.
2
Set the Power Switch to “PLAY” while 
pressing down the Lock Button located on the 
switch.
3
Press MENU. The Menu Screen appears.
4
Press 4, 3, 1 or 2 to 
select “FORMAT”, and 
press SET. The FORMAT 
screen appears.
5
Press 4 or 3 to select 
“EXECUTE”, and press 
SET. The memory card is 
initialized.
● When initialization is finished, “NO IMAGES 
STORED” appears.
● To cancel initialization, select “RETURN”.
CAUTION:
Do not perform any other operation (such as 
turning off the camcorder) during initialization. 
Also, be sure to use the provided AC Adapter, as 
the memory card may be corrupted if the battery 
becomes exhausted during initialization. If the 
memory card becomes corrupted, initialize it.
Initializing A Memory Card
GR-D395US.book  Page 30  Wednesday, June 21, 2006  9:51 AM