SPECIFICATIONS, Camcorder, AC Adapter

EN
 49
MasterPage: Start_Right
RE
FER
ENC
E
S
SPECIFICATIONS
Camcorder
Power supply
DC 11 V (Using AC Adapter)
DC 7.2 V (Using battery pack)
Power consumption
Approx. 3.2 W (3.5 W*) (LCD monitor off, viewfinder 
on)
Approx. 4.2 W (4.5 W*) (LCD monitor on, viewfinder 
off)
* Using LED Light
Dimensions (W x H x D)
56 mm x 94 mm x 112 mm (with the LCD monitor 
closed and the viewfinder pushed back in)
Weight
Approx. 430 g (without battery, cassette and lens 
cap)
Approx. 510 g (incl. battery, cassette and lens cap)
Operating temperature
0°C to 40°C
Operating humidity
35% to 80%
Storage temperature
–20°C to 50°C
Pickup
1/6" CCD
Lens
F 1.8, f = 2.2 mm to 55 mm, 25:1 power zoom lens
Filter diameter
ø27 mm
LCD monitor
2.5" diagonally measured, LCD panel/TFT active 
matrix system
Viewfinder
Electronic viewfinder with 0.16" colour LCD
Speaker
Monaural
LED Light
Effective distance: 1.5 m
Format
DV format (SD mode)
Signal format
PAL standard
Recording/Playback format
Video: Digital component recording
Audio: PCM digital recording, 32 kHz 4-channel 
(12-BIT), 48 kHz 2-channel (16-BIT)
Cassette
Mini DV cassette
Tape speed
SP: 18.8 mm/s, LP: 12.5 mm/s
Maximum recording time (using 80 min. 
cassette)
SP: 80 min., LP: 120 min.
S/AV
S-Video output:
Y: 1.0 V (p-p), 75
Ω, analogue
C: 0.29 V (p-p), 75
Ω, analogue
Video output: 1.0 V (p-p), 75
Ω, analogue
Audio output: 300 mV (rms), 1 k
Ω, analogue, stereo
Microphone input
ø3.5 mm, stereo
DV
Input/output: 4-pin, IEEE 1394 compliant
AC Adapter
Power requirement
AC 110 V to 240 Vd, 50 Hz/60 Hz
Output
DC 11 V G, 1 A
Specifications shown are for SP mode unless 
otherwise indicated. E & O.E. Design and 
specifications subject to change without notice.
For General
For Digital Video Camera
For Connectors
GR-D252AA_AG_AH_AS.book  Page 49  Tuesday, July 19, 2005  5:55 PM