Also refer to pg. 40 and 41.
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
A VCR other than above . . .
... connect the editing cable to the remote
control’s PAUSE IN connector.
Insert a recorded tape into the camcorder. Set the
VIDEO/DSC Switch to “VIDEO”, then set the Power
Switch to “
” while pressing down the Lock
Button located on the switch.
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
● Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
.... set “TIME CODE” to “ON” or “OFF” in the Menu
•Playback Sound Mode, Tape Speed And Tape Running
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen (
pg. 32). Or, press DISPLAY on the
● When connecting the cables, make sure to connect the
end with a core filter to the camcorder. The core filter
● Set the video out select switch of the cable adapter as
: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
● When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
To PAUSE IN
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the
core filter (plug which has 3 rings around
the pin) to the camcorder.
If your VCR has the
use the provided
[mini-plug to RCA
CONTINUED ON NEXT PAGE