AUDIO SYSTEM SET UP

AUDIO SYSTEM SET-UP 
14 
jack. 
3. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO mode disappears 
automatically after approximately eight seconds. 
4. Press the INPUT button to return to the previous channel. 
 
CONNECTING STEREO VCR OR STEREO LASERDISC PLAYER 
1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the 
TV set below. 
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 
4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears 
automatically after approximately eight seconds. 
5. Press the INPUT button to return to the previous channel. 
Stereo VCR or Video Disc Player Connection Illustration 
NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that played 
back will be abnormal if the connection is loose. 
If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable. 
AUDIO SYSTEM SET-UP 
Match the numbers below to the diagram for speaker placement and refer to the table for the different surround 
sound requirements. (See page 48 for SURROUND functions.) 
1 The television's internal speakers. 
2 These speakers are connected to a separate audio amplifier. Use the Audio to Hi-Fi output on the TV.