N Series BIOS

L i f e B o o k   N   S e r i e s   B I O S
N Series BIOS
The BIOS Setup Utility is a program that sets up the 
operating environment for your notebook. Your BIOS
is set at the factory for normal operating conditions, 
therefore there is no need to set or change the BIOS 
environment to operate your notebook.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security parameters, such as passwords.
Entering the BIOS Setup Utility
There are three ways to enter the BIOS Setup Utility: The 
SecureCore Menu, the [F2] key, or the Boot Menu. 
Entering BIOS Setup using the SecureCore Menu
When the Fujitsu logo appears on the screen. press the 
[Enter] key or click on the left mouse or touchpad 
button; the SecureCore Menu will appear. 
The SecureCore Menu provides shortcuts to the 
following menus and information screens: 
BIOS Setup
Diagnostic Screen
Boot Menu
Recovery and Utility
Diagnostic program
Patent Information
System Information
Continue Booting
Click on BIOS Setup to enter the utility.
Entering BIOS Setup using [F2] key
To enter the BIOS Setup Utility using the [F2] key: 
1. Turn on or restart your notebook.
2. Press [F2] once the Fujitsu logo appears on the 
screen. This will open the main menu of the BIOS 
Setup Utility with the current settings displayed.
Entering BIOS Setup using Boot Menu
To enter the BIOS Setup Utility using the Boot Menu: 
1. Turn on or restart your notebook.
2. Press [F12] once the Fujitsu logo appears on the 
screen. This will open the Boot Menu.
3. Select <Enter BIOS Setup> and click [Enter].
Navigating Through The Setup Utility
The BIOS setup utility consists of six menus: Main, 
Advanced, Security, Boot, Info, and Exit. This document 
explains each menu in turn, including all submenus and 
setup items.
The following procedures allow you to navigate the 
setup utility menus:
1. To select a menu, use the cursor keys: 
2. To select a field within a menu or a submenu, use the 
cursor keys: 
3. To select the different values for each field, press the 
[Spacebar] or [+] to change to the next higher 
selection and [F5] or [-] to go to the next lower 
4. To activate a submenu press the [Enter] key.
5. To return to a menu from a submenu, press the 
[Esc] key.
6. To go to the Exit menu from any other menu, press 
the [Esc] key.
7. Pressing the [F9] key resets all items in the BIOS to 
the default values.
8. Pressing the [F10] key saves the current configura-
tion and exits the BIOS Setup Utility. You will be 
asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
Selecting a field causes a help message 
about that field to be displayed on the 
right-hand side of the screen.
Pressing the Enter key with the highlight 
on a selection that is not a submenu or 
auto selection will cause a list of all 
options for that item to be displayed. 
Pressing the Enter key again will select 
the highlighted choice.
[       ], [      ].
[   ], [   ].