Fujitsu LifeBook N7010 BIOS Guide

SECURITY MENU SETTING THE SECURITY FEATURES

18
L i f e B o o k   N   S e r i e s   B I O S
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security 
features of your notebook to fit your operating needs 
and to view the current data security configuration. (See 
Navigating Through The Setup Utility on page 2 for more 
information.)
The following tables show the names of the menu fields 
for the Security Menu and its submenus, all the options 
for each field, the default settings and a description of 
the field's function and any special information needed 
to help understand the field's use. The default condition 
is no passwords required and no write protection.
Figure 13.  Security Menu
Remember your passwords! If you set and 
forget your User and Master hard disk 
passwords, Fujitsu Computer Systems will 
not be able to reset it. You may lose data 
and have to replace your system board or 
hard disk drive.
Entering a password incorrectly 3 times in 
a row causes the keyboard and mouse to 
be locked out and the warning 
[System 
Disabled] to be displayed. If this hap-
pens, restart the computer by turning off 
and on the power with the power switch 
and use the correct password on reboot.
If you make an error when re-entering 
the password a 
Warning will display on 
the screen. To try again press [Enter], 
then retype the password. Press [Esc] to 
abort the password setting process.
If the Power Management Security is 
Enabled and the Password on Boot is Dis-
abled, you will not have to type your 
password upon resuming the system 
from the Suspend or Save-to-Disk 
modes. Power Management Security will 
work only if Password boot is enabled.
Boot sector protection must be set to
 
[Normal] to install or upgrade an 
operating system.
F1
 Help
ESC
 Exit
Select Item
Select Menu
-/Space
Enter
F9
 Setup 
Defaults
F10
 Save and Exit
Change Values
Select  Sub-Menu
Item Specific Help
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
Supervisor Password Is: 
Clear
User Password Is: 
Clear
Set Supervisor Password 
[
Enter
]
Set User Password 
[Enter]
Minimum User Password Length: 
[0]
Password on Boot: 
[Disabled]
  On Automatic Wake up: 
[Disabled]
KB Lock on Resume: 
[Disabled]
Boot from Removable Media: 
[All]
Flash Write: 
[Enabled]
 
Hard Disk Security
Owner Information
▲ ▲
 
 
 
Phoenix SecureCore(tm) Setup Utility
Info    System    Advanced     
Security 
    Boot      Exit