Parts Name

CPL10B112-100

Parts Name

1

Film ejection slot

11

Brightness adjustment dial

2

Light sensor

12

Power button

3

Flash lampface

13

Flash charging lamp

4

Viewfinder

14

Back cover lock

5

Shutter button

15

Film pack confirmation window

6

Lens/Lens cover

16

Back cover

7

Self-portrait mirror

17

Film counter

8

Lens barrel

18

Eyepiece

9

Strap hook

19

Battery lid

10

Brightness indicator

20

Tabs (Back)

Inserting Batteries

3

2

1

Push up the battery lid lock, then slide 
off  the battery cover.

Insert two AA batteries matching the 

C

 and 

D

 polarities.

Slide on the battery lid to close.

Loading the INSTAX mini Film Pack

1

Press down the back cover lock 
to open the back cover.

Hold both sides of the fi lm pack, align the 
yellow marks on the camera and the fi lm pack 
as indicated on the INSTAX mini fi lm pack 
instructions, then insert it straight.

2

3

Close the back cover until the back 
cover lock clicks into place.

[IMPORTANT] Taking Pictures

Press the power button to turn the camera on.
The fl ash charging lamp on the left of the eyepiece 
starts blinking. (Indicates the fl ash is charging.)
You cannot take a photo while the lamp is blinking.

When the fi lm has been ejected 
(the camera stops making a sound), 
grasp the edge of the fi lm, then take 
it out.

3

4

When you have fi nished taking a 
photo, push the lens barrel to turn 
the camera off .

1

Turn the camera toward the subject, then turn 
the brightness adjustment dial to move to the 
position (

/

/

/

) where the lamp is lit.

SPECIFICATIONS

Every time you take a photo, the number 
on the fi lm counter decreases from “10” to 
refl ect the number of remaining photos, 
and “0“ is displayed when you have used up 
the fi lm pack.

5

6

You can photograph objects close-up, and can photograph yourself using the self-portrait mirror.

Attach the left tab on the back to the left 
of the lens (1), then attach the right tab 
(2) so that it clicks into place.

Hold the camera so that the “O” mark 
in the viewfi nder is on the upper right 
of the center of the subject (see the 
illustration above), then take a photo.

Lift up the right side of the close-up lens 
supporting the left side (1), then detach 
it (2).

WARNING

•  Do not look through the close-up lens at the sun or other strong light. Blindness or vision problems could result.

Caution

•  Do not leave the close-up lens in places exposed to strong sunlight. Personal injury or fi re could result if the lens should 

accidentally concentrate the sunbeams on an object or a person.

• Switch 

off  the camera before you attach/detach the close-up lens.

•  Never turn the close-up lens when you attach/detach it; otherwise, the tabs on the back may be broken.

Hold the camera securely 
keeping 35 cm to 50 cm 
between you and the edge 
of the lens.

Confi rm the composition using 
the self-portrait mirror, then take 
a photo.

Caution

•  Use new alkaline batteries of the same brand/type only (AA only).
•  Do not use any batteries other than alkaline batteries.
•  Replace both batteries in the following cases:

- When the red lamp on viewfi nder lights
- When no lamp lights or blinks even though the power is turned on

•  About 100 pictures (roughly 10 packs of INSTAX mini fi lm) can be taken with new batteries.
•  The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature 

before using this camera.

•  Use the supplied batteries for validation.

Caution

•  Make sure that the batteries are installed before loading the fi lm pack.
•  Avoid direct sunlight when loading the fi lm pack.
•  Do not use any fi lm other than FUJIFILM INSTAX mini fi lm.
•   When you load the fi lm pack, never press the two rectangular holes on the back.
•  

Do not open the back cover until you have used up the fi lm; otherwise, the rest of the fi lm is exposed and turns 
white. The fi lm can no longer be used.

•  Never use a fi lm pack beyond its shelf life; otherwise, it may damage the camera.
•  For details, refer to the instructions and warnings on FUJIFILM INSTAX mini fi lm.

Hold the camera, confi rm the desired composition of the fi nal image, 
then press the shutter button.
•  Keep a distance from the subject of at least 0.6 m. The fl ash has an 

eff ective range of between 0.6 m and 2.7 m.

•  The subject will be out of focus using the regular lens if the 

distance is less than 0.6 m. Use the close-up lens for short-distance 
photography. Using it enables you to photograph the subject 
between 35 cm and 50 cm.

•  In short-distance photography (including photography using the 

provided close-up lens), the center of the subject in the viewfi nder 
will be on the upper right on the actual print.

Caution on holding the camera

•  For horizontal image, hold the camera with the fl ash lampface at the top.
•  Do not take pictures where fl ash photography is forbidden.
•  Be careful so that your fi ngers or the strap do not cover the light sensor, fl ash lampface, fl ash, lens, or fi lm ejection 

slot.

•  Do not grasp the lens barrel when positioning the camera; otherwise, the fi nished print may not look as expected.
•  Look into the viewfi nder so that the “O” mark appears in the center.
•  Be careful not to touch the lens surface when you press the shutter button.

Using the Close-Up Lens

1

2

3

3

4

2

5

6

8

9

10

11

17

19

14

15

12

13

1

18

16

9

7

Front

20

When “0” is displayed on the fi lm counter, unload the fi lm pack following the procedure below and as indicated on the INSTAX 
mini fi lm pack instructions.

Unloading the INSTAX mini fi lm pack

Press down the back cover lock to 
open the back cover.

Grasp the rectangular holes on the fi lm pack, then pull 
it out straight.

1

2

Rear

Close-up lens

Vertical image

Horizontal image

Taking self-portraits

Film

FUJIFILM INSTAX mini film

Picture Size

62 mm × 46 mm

Lens

2 components, 2 elements, f=60 mm, 1:12.7

Viewfi nder

Real image finder 0.37× with target spot

Shooting range

0.6 m and beyond

Shutter Speed

1/60 sec.

Exposure Control

Manual switching system (LED indicator in exposure meter)

Film Feeding Out

Automatic

Film Developing Time

Approximately 90 seconds (Varies depending on the ambient temperature)

Flash

Constant firing flash (automatic light adjustment) Recycle time: 0.2 sec. to 6 sec. 
(when using new batteries) Effective flash range: 0.6 m – 2.7 m

Power Supply

Two AA-size 1.5V alkaline batteries  Capacity: 100 shots 
(Approximately 10 INSTAX mini 10-pack film packs with new AA batteries)

Auto power off  time

5 min.

Others

Exposure counter (number of unexposed films), film pack confirmation window

Dimensions

116 mm × 118.3 mm × 68.2 mm

Weight

307 g (without batteries, strap and film pack)

* Specifi cations are subject to change without notice.

TROUBLE SHOOTING

During operation

Problems

Possible Causes

Solutions

The shutter release won’t 
trip.

1 The battery power is low.
2 The batteries are not loaded 

correctly.

3 Power is not turned on.
4 Camera has remained idle for 

roughly 5 minutes with the 
power turned on.

1 Replace the batteries with new ones.
2 Load the batteries correctly.
3 Press the power button to turn on the power.
4 Press the power button after retracting the lens or press the 

shutter release button to restore the power-on state.

The lamp on the view 
fi nder blinks and the 
shutter release won’t trip.

● Flash is charging.

● Wait until the lamp on the brightness adjustment dial is lit 

without blinking.

The fi lm pack won’t load 
into your camera, or won’t 
load into your camera 
smoothly.

1 The fi lm pack is not for your 

camera.

2 You are not loading the fi lm 

pack correctly.

1 Use FUJIFILM INSTAX mini fi lm only. (No other fi lms can be 

used.)

2 Match the yellow line on the fi lm pack with the yellow 

positioning mark in your camera. Follow the INSTAX mini 
fi lm pack instructions.

All lamps on the 
brightness adjustment 
dial blink at the same 
time.

1 The battery power is low, and 

it takes a long time to charge 
the fl ash.

2 A more signifi cant issue with 

your camera has occurred.

● Replace the batteries with new ones while the power is 

turned on (when the lens is extended).

IMPORTANT:

Replace the batteries only while the power is turned on. 
If you replace the batteries while the power is turned off  
(when the lens is retracted), the lamps on the brightness 
adjustment dial blink after turning on the power even with 
new batteries.

*  When the problem is due to reason 1, the lamps on the 

brightness adjustment dial turn off  after replacing the 
batteries.
If the problem is due to reason 2, the lamps on the 
brightness adjustment dial blink even after replacing the 
batteries. In this case, turn off  the power and remove the 
batteries immediately, then contact an authorized FUJIFILM 
repair center.

The red lamp on the view 
fi nder lights up.

● The battery power is low.

● Replace the batteries with new ones.

Printed pictures

Problems

Possible Causes

Solutions

The fi nished print looks 
over exposed. (White in 
color)

1 The method of measuring 

the subject brightness is 
unsuitable.

2 Brightness adjustment dial 

setting is incorrect.

3 The ambient temperature is 

low (below +5°C/+41°F).

4 The background is too dark in 

comparison with the subject.

5 The light sensor or fl ash sensor 

window is blocked.

1 Point the lens toward the center of the subject and 

measure the subject brightness.

2 While pointing the lens toward the subject, turn the 

brightness adjustment dial to set the brightness to that for 
which the lamp lights.

3 Before taking pictures, place your camera in a warm place 

to bring it to room temperature.

4 Turn the brightness adjustment dial one step toward the 

 direction.

5 When taking a picture, be careful not to cover the two small 

windows next to the fl ash on the camera.

The fi nished print looks 
under exposed. (Dark)

1 The method of measuring 

the subject brightness is 
unsuitable.

2 Brightness adjustment dial 

setting is incorrect.

3 The ambient temperature is 

high (above +40°C/+104°F).

4 The picture was taken with 

direct light in front of you.

5 The fl ash lampface was 

blocked.

6 The background is too bright 

in comparison with the 
subject.

7 The fl ash did not reach the 

subject.

8 The fl ash refl ected back from a 

mirror or window glass.

9 Grasping the lens barrel 

did not let the shutter work 
properly.

1 Point the lens toward the center of the subject and 

measure the subject brightness.

2 While pointing the lens toward the subject, turn the 

brightness adjustment dial to set the brightness to that for 
which the brightness adjustment dial lamp lights.

3 Before taking pictures, place your camera in a cool place. 

When the picture comes out from your camera, keep 
it away from places or objects with excessively high 
temperature.

4 Take a picture with the light behind you, or turn the 

brightness adjustment dial one step toward the 

 

direction.

5 When holding your camera, be careful not to block the 

fl ash lampface with your fi nger or strap.

6 Turn the brightness adjustment dial one step toward the 

 direction.

7 Take pictures within 0.6 m to 2.7 m from the subject.
8 Adjust your position in taking the picture away from the 

mirror or window glass.

9 Do not grasp the lens barrel when you take pictures.

The picture is out of focus. 1 The shooting range is too close 

to the subject.

2 The lens is not clean.
3 Your camera was shaken when 

taking pictures.

1 Take pictures with a distance of at least 0.6 m between you 

and your subject.

2 Clean the lens.
3 Hold your camera fi rmly and press the shutter release 

button gently.

The picture is blurred.

1 Picture was not permitted to 

develop without touching, 
pressure being applied or other 
interference once it ejected 
from the camera.

2 The picture did not come out 

smoothly.

1 Do not press onto or fold the picture.
2 Do not block the fi lm exit with your fi nger.

The subject in the 
viewfi nder has shifted in 
fi nished print.

● The shooting range is too close 

to the subject.

● Take pictures with a distance of at least 0.6 m between you 

and your subject.

IMPORTANT SAFETY NOTICE

This product has been designed with safety in mind, and to provide safe service when handled correctly and in ac-
cordance with the User’s Guide and instructions. It is important that both the product and the INSTAX fi lm are handled 
properly and used only to take pictures as instructed in this User’s Guide and in the INSTAX mini fi lm instructions. For 
your ease and safety, please follow what is written in this User’s Guide. It is also a good idea to keep this User’s Guide in a 
safe, easy to fi nd place where you can refer to it if needed.

 WARNING

This symbol indicates danger, which could result in injury or death. Please follow these instructions.

 WARNING

  Never attempt to take this product apart. There is a danger of an electric shock.

 If this product is dropped or damaged so that the inside is showing, do not touch it. There is danger of an electric shock.
 If the camera or the batteries inside become hot, begin to smoke, make a burning smell or show any sign of unusual condition, 

remove the batteries right away. Use gloves to keep from burning your hands. Not removing batteries could result in burns or fi re.

  Using a fl ash too close to a person’s eyes may for the short term aff ect the eyesight. Take care when taking picture of infants 

and young children.

 If your camera gets wet or if something such as pieces of metal get inside, remove the batteries right away to avoid heat 

buildup or a fi re starting inside the camera.

 Do not use this camera in places where there is fl ammable gas or near open gasoline, benzene, paint thinner or other 

unstable substances which can give off  dangerous vapors. Doing so could result in explosion or fi re.

 Store your camera out of the reach of infants and young children. Failure to do this could result in serious injury. (For 

example, the strap could become wrapped around a child’s neck and cause choking.)

 Never take apart the batteries. Do not subject them to heat, throw them into an open fi re, or attempt to short-circuit them. 

Doing so could result in the batteries exploding or splitting open causing burns or fi re.

 Only use specifi ed batteries in this product.  Use of incorrect type of batteries could cause explosion.  Dispose of used 

batteries according to battery disposal instructions.

 Make sure batteries are stored in a safe, secure place and well out of the reach of any infants, young children or pets. Improper 

storage could result in a child swallowing a battery. (If a child swallows a battery, call a doctor or a hospital right away.)

 Do not look through the close-up lens at the sun or other strong light. Blindness or vision problems could result.
 Never get this product wet or handle it with wet hands. Doing so may result in an electric shock.
 Never take fl ash photographs of people riding bicycles, driving cars or riding a horse. The fl ash can distract the driver and 

frighten the animal, possibly causing an accident.

 Make sure that the battery 

C

 and 

D

 polarities are installed correctly in the camera. A damaged battery or electrolyte 

leakage may cause a fi re, injury, and contaminate the environment.

 Do not touch moving parts inside the camera. You may be injured.
 When using the camera, make sure that the battery cover is attached; otherwise, you may be injured.
 Do not leave the close-up lens in places exposed to strong sunlight. Personal injury or fi re could result if the lens should 

accidentally concentrate the sunbeams on an object or a person.

 Do not swing around the camera

. You may be injured.

The “CE” mark certifi es that this product satisfi es the requirements of the EU (European Union) regarding safety, 
public health, environment and consumer protection. (“CE” is the abbreviation of Conformité Européenne.)
This product is in conformity with Directive 89/336/EEC.

For customers in Turkey:

EEE Complies with Directive.

For customers in the USA:

FCC Statement

This device complies with part 15 of the FCC Rules.  Operation is subject to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in 
a particular installation.  If this equipment does cause harmful interference to radio or television, which can be determined by turn-
ing the equipment off  and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit diff erent from that to which the receiver id connected
•Consult the dealer or an experienced radio/TV technician for help

Changes or modifi cations not expressly approved by FUJIFILM responsible for compliance could void the user’s authority to oper-
ate the equipment.

For customers in Canada:

CAUTION: This Class B digital apparatus complies with Canadian ICES-003.

Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment 
(Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be 
treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. 
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and 
human health, which could otherwise be caused by inappropriate waste handling of this product.
If your equipment contains easy removable batteries or accumulators, please dispose these separately according to your local 
requirements. 
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please 
contact your local city offi

  ce, your household waste disposal service or the shop where you have purchased the product.

In Countries outside of EU: If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.

COMMON SENSE CAMERA CARE

CAMERA CARE

1 Your camera is a precision instrument. Do not get it wet or drop it. Also, do not expose to sand.
2 Do not use a strap made for cellular phones or other similar electronic products. These straps are usually too weak to hold your 

camera securely. For safety, use only straps designed for your camera, and use only as specifi cally intended and instructed.

3 If you are not using your camera for a long interval, unload the batteries and keep it where it will be safe from heat, dust, and 

moisture.

4 Remove soil and dust from the lens, viewfi nder window, etc. with an air blower and by wiping lightly with a piece of soft cloth.
5 Do not use solvent such as thinner and alcohol to remove soil.
6 Keep the fi lm chamber and camera interior clean to avoid damaging fi lms.
7 In hot weather, do not leave your camera in a closed car or on the beach, and do not leave it in moist places.
8 Moth repellent gas such as naphthalene adversely aff ects your camera and fi lms. Avoid keeping your camera or fi lms in a chest 

with mothballs.

9 Your camera is computer-controlled. If you should experience an operational issue, remove the batteries and then reload them.
0 Note that the temperature range within which your camera can be used is +5°C/+41°F to +40°C/+104°F.

INSTAX mini FILM AND PRINT CARE

See FUJIFILM INSTAX mini fi lm for fi lm use instructions. Follow all instructions for safe and proper use.
1 Keep the fi lm in a cool and dry place. Do not leave the fi lm in a place where the temperature is extremely high (e.g., in a closed car).
2 When you load a fi lm pack, use the fi lm as soon as possible.
3 If the fi lm has been kept  in a place where the temperature is extremely high or low, bring it to room temperature before start-

ing to take pictures.

4 Be sure to use the fi lm before the expiration or “Use Before” date.
5 Avoid airport checked luggage inspection and other strong X-ray illumination. The eff ect of fogging, etc. may appear on un-

used fi lm. We recommend that you carry the camera and/or the fi lm onto the aircraft as carry-on luggage. (Check with each 
airport for more information).

6 Avoiding strong light, keep the developed prints in a cool and dry place.
7 Do not puncture, tear, or cut INSTAX mini fi lm. If fi lm becomes damaged, do not use.

Cautions on handling the fi lm and prints

For details, refer to the instructions and warnings on FUJIFILM INSTAX mini fi lm.

Information for traceability in Europe

Manufacturer: FUJIFILM 

Corporation

Address, City: 

7-3, Akasaka 9-Chome, Minato-ku, Tokyo

Country: JAPAN
Authorized representative in Europe: FUJIFILM EUROPE GMBH
Address, City: Dusseldorf Heesenstrasse 31, 40549
Country: Germany

Information for FUJIFILM in Canada

FUJIFILM Canada Inc.
600 Suffolk Court, Mississauga, Ontario L5R 4G4

Information for FUJIFILM in the United States

FUJIFILM North America Corp.
200 Summit Lake Drive
Valhalla, New York 10595, USA

4

Press the power button to 
turn the camera on.
The fl ash charging lamp on 
the left of the eyepiece starts 
blinking. (Indicates the fl ash is 
charging.)

5

When you press the shutter button, the 
fi lm cover (black) is ejected, and the fi lm 
counter display on the back changes from 
“S” to “10”.

After the fi lm cover has been ejected 
(the camera stops making a sound), 
grasp the edge of the fi lm, then take it 
out.
Your camera is now ready to take a 
photo.

6

[IMPORTANT]  Taking a lighter (Hi-Key) picture

Position at which the lamp lights

Position to set the dial for a lighter (Hi-
Key) picture

This camera automatically determines an appropriate brightness for taking any given picture, and informs you by lighting the 
corresponding lamp.
To take a lighter (Hi-key) picture, set the position of the brightness adjustment dial to the position of the mode darker than the 
mode for which the lamp on the dial lights.

Caution

Do not use the 

 (Hi-key) function outside; otherwise, the picture may be much 

lighter (whiter) than you intend.

2

BO-1_rev_sheet_ENFR.indd   1

BO-1_rev_sheet_ENFR.indd   1

2017/1/5   11:40:10

2017/1/5   11:40:10