Remote Relay Broadcast Performing Relay Broadcast to Remote Locations

Broadcast
211
Fa
x
4
The following shows an example of F Code that indicates printing at the relay station, 
notifying the initiating station (100) of the results, and performing Relay Broadcast to 
relay recipients (200, 201, 202, and 203).
F Code example: 21100200201202203
5
If necessary, enter the password using the numeric keypad.
Remote Relay Broadcast (Performing Relay Broadcast to Remote 
Locations)
The Remote Relay Broadcast feature combines two or more Relay Broadcast 
operations and use Broadcast Send.
This feature is more economical than Relay Broadcast in transmitting documents to 
multiple remote machines.
Note
• Multiple Relay Broadcast can be performed from a secondary relay station.
The following three methods are available in Remote Relay Broadcast:
Fax Signal Method
This method employs a Fuji Xerox proprietary communication procedure that is only for 
use with specific machines that support the Relay Broadcast feature.
DTMF Method
G3 fax machines that support Manual Send can perform Remote Relay Broadcast for 
the machine.
F Code Method
This method can be used among machines that support the F Code and the Relay 
Broadcast features.
Fax Signal Method
Register the following information in the address numbers of initiating stations in 
advance.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book 
Entry" in the Administrator Guide.
For information on the setting items to be registered in a primary relay station and a secondary relay 
station, refer to the documentations provided with them.
1
Select an address number or group dial number to which a remote relay broadcast is 
registered, and press the <Start> button.
DTMF Method
The following two types are available in the DTMF method: Auto Send and Manual 
Send.
Where
Contents
Initiating 
Station
Assign the relay station to an address number (0001 to 2000) to set up the 
Relay Broadcast feature.
Register the last two digits of the address number of the initiating station 
(which is already registered at a primary relay station) as a relay station ID.
Register the address numbers or group dial number of the secondary relay 
stations (which are registered at a primary relay station) as broadcast 
recipients.