Changing the Paper Size
Open the end guide (1) and load and align
the edge of the paper against the right edge
of the tray with the side to be copied or
printed on facing up (2).
Important • Do not load paper exceeding the
maximum fill line. It might cause paper
jams or machine malfunctions.
Close the end guide tightly.
Push the tray in gently until it comes to a stop.
Changing the Paper Size for Tray 6 (HCF B1-S)
The following describes how to change the paper size for Tray 6 (HCF B1-S).
Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do not pull the tray out that the job uses.
• To prevent paper jams or misloading, do not load new paper into the tray until the tray is
empty. Remove any paper remaining in the tray and then load the paper on newly loaded
Remove any paper loaded in the tray.
Load a stack of paper (approximately 100 to
500 sheets) and align the edge of the paper
against the right edge of the tray with the
side to be copied or printed on facing up (1).
Move the long-side paper guide while
holding the grip so that they lightly contact
the edges of the paper (2).
Make sure to pull out the tray
slowly. When the tray is being
pulled out with force, the tray
may possibly hit your knees or
other parts of your body causing