INSTALLATION

6

INSTALLATION

NOTE

All set screws should be tightened and sub-flush (Allen set screw should be seated just 

below the surface of the end cap) of handle end cap. The end caps should be drawn tight to 

refrigerator door with no gaps.

Door Handle Mounting Instructions 

1. Remove handle from carton and any other protective packaging. 
2. Position refrigerator handle end caps over upper and lower pre-installed shoulder bolts (A) 

that are fastened into door, ensuring the holes for the set screws are facing towards the 

outside of door if a single unit installation or the freezer door (if installing the matching 

freezer). 

3. While holding handle firmly against door, fasten upper and lower Allen set screws (B) with 

supplied Allen wrench. 

4. Repeat steps 2 and 3 to install freezer handle (if installing the matching freezer).  Ensure 

the holes for the set screws are facing towards the refrigerator door.

A

B

Single Unit Installation

A

B

Ensure Handle Set Screws are Facing 

Each Other with Doors Closed.

Matching Refrigerator and Freezer Door 

Handle Installation

Ensure Handle Set Screws are Facing 

Each Other with Doors Closed

Frigidaire Gallery

®

Frigidaire Professional

®

Ensure Handle Set Screws are Facing 

Each Other with Doors Closed.