Epson Stylus Pro 10600 Setup Guide

Safety Instructions

Safety Instructions
Important Safety Instructions
Read all of these instructions before using your 
printer. Also be sure to follow all warnings and 
instructions marked on the printer.
Do not block or cover the openings in the 
printer cabinet.
Do not insert objects through the slots. Take 
care not to spill liquid on the printer.
Use only the type of power source indicated 
on the printer’s label.
Do not use a damaged or frayed power cord.
If you use an extension cord with the printer, 
make sure the total ampere rating of the 
devices plugged into the extension cord does 
not exceed the cord’s ampere rating. Also, 
make sure the total ampere rating of all 
devices plugged into the wall outlet does not 
exceed the wall outlet’s ampere rating.
Do not attempt to service the printer yourself.
Unplug the printer and refer servicing to 
qualified service personnel under the 
following conditions:
The power cord or plug is damaged; liquid has 
entered the printer; the printer has been 
dropped or the cabinet damaged; the printer 
does not operate normally or exhibits a 
distinct change in performance.
The interface connector (including Type B 
interface card) and the connector for optional 
Auto Take-up Reel Unit are Non-LPS 
(non-limited power source).
A Few Precautions
When choosing a place for the printer
Avoid places subject to rapid changes in 
temperature and humidity. Also keep the 
printer away from direct sunlight, strong 
light, or heat sources.
Avoid places subject to shocks and vibrations.
Keep the printer away from the dusty area.
Place the printer near a wall outlet where the 
plug can be easily unplugged.
When using the printer
Do not put your hand inside the printer or 
touch the ink cartridges during printing.
Do not move the print heads by hand; 
otherwise you may damage the printer.
When handling the ink cartridges
Keep ink cartridges out of the reach of 
children and do not drink.
If ink gets on your skin, wash it off with soap 
and water. If it gets in your eyes, flush them 
immediately with water.
If you use UltraChrome or ColorFast ink 
cartridges, shake the ink cartridge gently 
before installing it for best results.
Do not shake cartridges that have been installed 
Do not use an ink cartridge beyond the date 
printed on the cartridge carton.
Use up the ink cartridge within six months of 
installation for best results.
Store ink cartridges in a cool, dark place.
Do not dismantle the ink cartridges or try to 
refill them. This could damage the print head.
Do not touch the green IC chip on the side of 
the ink cartridge. This may affect normal 
operation and printing.
Do not touch the ink supply port or 
surrounding area of the ink cartridge.