3. After installing the utility, type
is your hard
disk drive letter). Then press
The following window appears:
4. Make sure
EPSON Stylus COLOR
is selected. Click
follow the directions on the screen
to align the print head.
Aligning the Print Head Using the Control Panel
If you cannot use the print head alignment utility program that came with your
printer, follow these steps to align the print head.
1. Make sure that letter-size or A4-size paper is loaded in the sheet feeder.
2. While holding down the
P power button
on the printer. Then release both buttons.
S paper out light flashes for about three seconds. While it is flashing, press
E load/eject button.
The printer prints a sheet of instructions in English, French, German, Italian,
Spanish, and Portuguese explaining how to align the print heads. Follow these
load/eject button isn’t pressed while the
S paper out
light is flashing, the printer enters default-setting mode. If this
happens, turn off the printer and repeat steps 2 and 3.
4. After aligning the print head, turn off the printer to exit print head alignment
basics.book Page 37 Friday, January 8, 1999 11:57 AM