Turning Off Paper Monitoring Features, Selecting the Printer s Interface

2-9
Monitoring and Configuring the Printer
|
2-9
3. When you have selected the setting you want, press the 
Enter
 button to 
save it.
4. Press the
 SelecType
 button to exit the Printer Setting menu.
Turning Off Paper Monitoring Features
The printer normally stops and displays an error message if you try to print 
an image wider than the paper, or if paper is fed at an angle. You can turn off 
the paper size check and/or paper alignment check if you don’t want to use 
these monitoring features. However, ink may be sprayed on the platen if you 
print an image that is too wide for the paper. Follow these steps to turn off 
paper monitoring:
1. Press the 
SelecType
 button. 
PRINTER SETTING MENU
 appears on 
the display.
2. Press the 
Item
 button repeatedly until 
PAPER SIZE CHK=ON 
or 
PAPER ALIGN CHK=ON 
appears on the display. 
3. Press the
 +
 button. 
PAPER SIZE CHK=OFF 
or 
PAPER ALIGN 
CHK=OFF 
appears on the display.
4. Press the 
Enter
 button to save your new setting.
5. Press the
 SelecType
 button to exit the Printer Setting menu.
Selecting the Printer’s Interface
The printer includes both a parallel and serial interface. You can also install 
an optional interface card for networking or additional connectivity. By 
default, the printer automatically switches to whichever interface is receiving 
data. 
You can use the control panel to select an individual interface for sending 
data to the printer. Follow these steps: 
1. Press the 
SelecType
 button. 
PRINTER SETTING MENU
 appears on 
the display.
2. Press the 
Item
 button repeatedly until 
INTERFACE=AUTO* 
appears on 
the display. This is the default setting.