Problems and Solutions
The printer stops printing
The printer may be out of paper. Check the paper supply.
The paper may be jammed. Remove the jammed paper and
The ribbon may be jammed. See the section on replacing the
ribbon later in this chapter.
light is off and
the ON LINE
light is flickering, the
stopped to allow the print head to cool. Printing
resumes soon; you do not have to do anything to restart it.
If the printer stops, the beeper sounds, and the
flicker, turn the printer off and
turn it back on
and try to print again. If
printer beeps again and does not
print, take it to a qualified service person.
Single sheets do not feed properly
The position of the paper release lever may be wrong. Push it
back to the single-sheet position.
The paper may be too large or too small. See the printer’s paper
specifications in Chapter 5.
The paper guide
not be installed properly. See
on installing the paper guide in Chapter 2.
The cut sheet feeder mode may be selected by the DIP switch.
section on setting DIP switches in Chapter 3.
Troubleshooting and Maintenance