Troubleshooting and Maintenance
SelecType, which is usually accessible from the printer’s control
panel, has been disabled. This message can be cleared in the
Remote Control Panel utility by clearing the Panel Lock check
box on the Panel menu. To change this setting, consult your
Multibin Error xxx
An error occurred with the optional Multibin Unit. Turn off the
printer, wait 5 seconds, then turn it back on.
If the message still appears, contact your dealer or a qualified
Multibin x Full
The bin x (1 to 10) on the optional Multibin Unit is full with printed
sheets. Remove the sheets from bin x and press Continue.
Your printer lacks the amount of the printer memory required to
print your print job. Reduce the images or texts on the print job,
or install an optional memory module. See “Memory modules”
on page 3-47.
The printer is not ready to print. Press the On Line button.