Check the level in the surge tank when the cooling
system has cooled down. If the coolant is not at
the proper level, repeat Steps 1 through 3 and reinstall
the pressure cap. If the coolant is not at the proper
level when the system cools down again, see your
Windshield Washer Fluid
What to Use
When you need windshield or rear window washer ﬂuid
be sure to read the instructions before use. If you
will be operating your vehicle in an area where the
temperature may fall below freezing, use a ﬂuid that has
sufficient protection against freezing.
Adding Windshield Washer Fluid
Open the cap with the
washer symbol on it.
Add washer ﬂuid until the
tank is full. See Engine
on page 5-12 for reservoir
When using concentrated washer ﬂuid,
follow the manufacturer’s instructions for
Do not mix water with ready-to-use washer ﬂuid.
Water can cause the solution to freeze and
damage your washer ﬂuid tank and other parts
of the washer system. Also, water does not
clean as well as washer ﬂuid.
Fill your washer ﬂuid tank only three-quarters
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.