Casio EXILIM EX-ZS26 User Guide

Connecting the Camera to Your Computer and Saving Files


Using the Camera with a Computer


• The camera does not support operation with Mac OS X 10.0. Operation is 

supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, 10.6, 10.7 and 10.8 (using the 
OS standard USB driver) only.


• You also can use your computer’s card slot (if it has one) or a commercially 

available card reader to access image files directly from the camera’s memory 
card. For details, see the user documentation that comes with your computer.


To connect the camera to your computer and save files


Turn on the camera. Next, press [SET] and then display the REC menu 
(page 55) or the PLAY menu (page 71).


On the “Set Up” tab, select “USB” and then press [6].


Use [8] and [2] to select “Mass Storage”, and then press [SET].


Turn off the camera and 
then use the USB cable 
that comes with the 
camera to connect it to 
your Macintosh.

• Connecting the camera to 

a computer with a USB 
cable starts charging of 
the camera’s battery 
(page 17).

• Make sure that you insert 

the cable connector into 
the USB/AV port until you 
feel it click securely into 
place. Failure to insert the 
connector fully can result 
in poor communication or 

Connecting the Camera to Your Computer and Saving Files

USB port

USB cable 

(included with camera)

[USB/AV] port

Large connector

Small connector

Making sure that the   mark on the USB cable 
connector is towards the lens side, connect the 
cable to the camera.