Canon XC15 Instruction Manual

Searching for Access Points

Wireless Connections Using Wi-Fi

126

Menus

Table of Contents

Index

                                       

                                      

                                       

5 Within 2 minutes, touch [OK] on the camcorder’s screen.

• While the camcorder is attempting to connect to the access point, you can touch [Stop] and then [OK] to 

interrupt the operation.

6 When the confirmation screen appears, touch [OK] and then touch [

X].

NOTES

• The [WPS: Button] method may not work correctly if there are several active access points in the area. In such 

case try using [WPS: PIN Code] or [Search for Access Points] (

A 126) instead.

WPS using a PIN code

1 Press the MENU button.

2 Open  the  [

Access Point Connection] screen.

[— Wi-Fi Setup] 

> [1] > [Access Point Connection]

3 Touch [Not Configured] and then touch [WPS: PIN Code].

• After approximately 7 or 8 seconds, the camcorder will generate and 

display a PIN code.

4 Enter the PIN code from step 3 into the wireless router’s WPS (PIN code) setup screen.

• For most wireless routers, you must use a Web browser to access the setup screen.

• For details about how to access your wireless router’s settings and activate the Wi-Fi Protected Setup 

(WPS) using a PIN code, refer to the instruction manual of your wireless router.

5 Within 2 minutes, touch [OK] on the camcorder’s screen.

• While the camcorder is attempting to connect to the access point, you can touch [Stop] and then [OK] to 

interrupt the operation.

6 When the confirmation screen appears, touch [OK] and then touch [

X].

Searching for Access Points

The camcorder will automatically detect access points in the vicinity. After you select the desired access point, 
you only need to enter the selected network’s encryption key (password) to connect the camcorder.

1 Press the MENU button.

2 Open the [— Access Point Connection] screen.

[— Wi-Fi Setup] 

> [1] > [Access Point Connection]

3 Touch [Not Configured] and then touch [Search for Access 

Points].

• The camcorder will search for active access points in your area and 

display a list of available options.

[— Wi-Fi Setup]

[1]

[Access Point Connection]

[— Wi-Fi Setup]

[1]

[Access Point Connection]